3 Inch Rear Lift Blocks for 2001 Ford F150 4X4

Supreme Suspensions - Rear Leveling Kit for Dodge: 1994-2008 Ram 1500, 1994-2013...
  • COMPATIBLE WITH 1994 - 2008 Dodge Ram 1500, 1994 - 2013 Dodge Ram 2500 and 1994 - 2012 Dodge Ram 3500 (2WD). *Does NOT Fit Mega Cab Models OR models with 3/4" axle pins.
  • CONTENTS: (2x) Rear Tapered Lift Blocks, Installation Instructions, Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: 3 inch rear suspension lift. PLEASE NOTE: *These Blocks have 9/16" pins and will fit ONLY vehicles with Single 9/16" Axle Pin Holes. Please check your truck's rear setup before ordering.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours. Please note that our lift blocks are designed to install directly to your truck's factory suspension, and we do NOT recommend stacking them.| Longer U-bolts are required for installation - NOT included in this kit. An alignment is always recommended after altering the height of your vehicle.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
Supreme Suspensions - 3" Rear Tapered Steel Lift Blocks Kit for 1999-2020...
  • COMPATIBLE WITH 1999 - 2020 Chevrolet Silverado 1500 (2WD 4WD) and 1999 - 2020 GMC Sierra 1500 (2WD 4WD). Will Fit 6-Lug Models Only.
  • CONTENTS: (2x) Rear Tapered Lift Blocks, Installation Instructions, Supreme Suspensions Pro Pack. NOTE: Longer U-bolts are required for installation - NOT included in this kit. Please see our other auctions for our complete rear lift kit.
  • TECHNICAL NOTES: 3 inch rear suspension lift. Blocks Specifications: 3" Tall x 2.5" Wide, 9/16th Pins.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours. Longer U-bolts are required for installation - NOT included in this kit. An alignment is always recommended after altering the height of your vehicle.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
Supreme Suspensions - 3" Rear Tapered Steel Lift Blocks Kit for 2001-2010...
  • COMPATIBLE WITH 2001 - 2010 Chevrolet Silverado 1500HD (2WD 4WD) and 2000 - 2010 Chevrolet Silverado 2500HD / 3500HD (2WD 4WD). Will Fit 8-Lug Models Only.
  • CONTENTS: (2x) Rear Tapered Lift Blocks, Installation Instructions, Supreme Suspensions Pro Pack. NOTE: Longer U-bolts are required for installation - NOT included in this kit. Please see our other auctions for our complete rear lift kit.
  • TECHNICAL NOTES: 3 inch rear suspension lift. Blocks Specifications: 3" Tall x 2.5" Wide, 9/16th Pins.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours. Longer U-bolts are required for installation - NOT included in this kit. An alignment is always recommended after altering the height of your vehicle.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
Supreme Suspensions - Full Lift Kit for 1997-2004 Ford F-150 Adjustable 1" to 3"...
  • COMPATIBLE WITH 1997 - 2003 Ford F-150 and 2004 Ford F-150 Heritage. For 4WD Models Only.
  • CONTENTS: (2x) Front Steel Lift Torsion Keys, (2x) Rear Billet Aluminum Lift Blocks, (4x) Round Bend U-Bolts, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift.
  • INSTALLATION: Easy installation takes 2 - 4 hours. A torsion bar puller (can be rented at most chain auto stores), or 5 ton gear puller is required for install. An alignment is always recommended after altering the height of your vehicle.
  • BENEFITS: Improves the look of your truck and increases ground clearance, allowing you to fit larger custom rims and tires. Includes re-indexed MAX-Torsion Keys, TWICE the strength of the factory system.
Supreme Suspensions - 3" Rear Tapered Steel Lift Blocks Kit for 2001-2010 GMC...
  • COMPATIBLE WITH 2001 - 2010 GMC Sierra 1500HD (2WD 4WD) and 2000 - 2010 GMC Sierra 2500HD / 3500HD (2WD 4WD). Will Fit 8-Lug Models Only.
  • CONTENTS: (2x) Rear Tapered Lift Blocks, Installation Instructions, Supreme Suspensions Pro Pack. NOTE: Longer U-bolts are required for installation - NOT included in this kit. Please see our other auctions for our complete rear lift kit.
  • TECHNICAL NOTES: 3 inch rear suspension lift. Blocks Specifications: 3" Tall x 2.5" Wide, 9/16th Pins.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours. Longer U-bolts are required for installation - NOT included in this kit. An alignment is always recommended after altering the height of your vehicle.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
Supreme Suspensions - 3" Front + 2" Rear Lift for 2002-2008 Dodge Ram 1500 [4x2]...
  • COMPATIBLE WITH 2002 - 2008 Dodge Ram 1500 (2WD). Does not fit Extended Cab or Mega Cab models.
  • CONTENTS: (2x) Front Billet Aluminum Lift Spring Spacers, (2x) Rear High-Strength Steel Lift Blocks with Build-In Taper, (4x) Round Bend U-Bolts, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack
  • TECHNICAL NOTES: 3 inch front and 2 inch rear suspension lift. This Kit Includes 4x U-Bolts: 9/16" Threads, 10" Long x 3.5" Wide. Please note that spacer thickness to lift height is NOT a 1:1 ratio; it is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours without the need for special tools. An alignment is always recommended if you are altering the height of your vehicle. Please note: We recommend using a Coil Spring Compressor for easy removal and reinstallation of your springs.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
WULF 3" Front 3" Rear Lift Kit with Shocks compatible with 1997-2003 Ford F150...
  • Compatible with 1997-2003 Ford F150 4X4
  • FRONT: 1-3" Adjustable Lift Steel Torsion Keys, (2) WULF Stealth Nitro Gas Shock Absorbers, Hardware Included
  • REAR: 3" Lift Fabricated Steel Powder Coated Angled Blocks, (4) Zinc Coated U-bolts, (2) WULF Stealth Nitro Gas Shock Absorbers, FREE Red Shock Dust Boots Included, Hardware Included
  • NOTE: 4X4 4WD models only. TORSION BAR SUSPENSION MODELS ONLY Please see the description for full details, or contact us for assistance
  • Fast Shipping. Manufacturers Lifetime Warranty. Dedicated Customer Service
WULF 1-3" Front 3" Rear Lift Kit with Torsion Keys compatible with 1997-2003...
  • Compatible with 1997-2003 Ford F150 4X4
  • FRONT: 1-3" Adjustable Lift Steel Torsion Keys
  • REAR: 3" Lift Fabricated Steel Powder Coated Angled Blocks, (4) Zinc Coated U-bolts, Hardware Included
  • NOTE: 4X4 4WD models only. TORSION BAR SUSPENSION MODELS ONLY Please see the description for full details, or contact us for assistance
  • Fast Shipping. Manufacturers Lifetime Warranty. Dedicated Customer Service
Supreme Suspensions - Rear Lift Kit Compatible with 1999-2020 Chevrolet...
  • COMPATIBLE WITH 1999 - 2020 Chevrolet Silverado 1500 (2WD 4WD). Will Fit 6-Lug Models Only.
  • CONTENTS: (2x) Rear Tapered Lift Blocks, Installation Instructions, Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: 3 inch rear suspension lift. Blocks Specifications: 3" Tall x 5.8" Long x 2.5" Wide, 9/16th Pins.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours. Please note that our lift blocks are designed to install directly to your truck's factory suspension, and we do NOT recommend stacking them.| Longer U-bolts are required for installation - NOT included in this kit. An alignment is always recommended after altering the height of your vehicle.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
Supreme Suspensions - Full Lift Kit for 1997-2003 Ford F-150 3" Front Lift...
  • COMPATIBLE WITH 1997 - 2003 Ford F150 (2WD). Does not fit Extended Cab models.
  • CONTENTS: (2x) Front Billet Aluminum Lift Spring Spacers, (2x) Rear High-Strength Steel Lift Blocks with Build-In Taper, (4x) Round Bend U-Bolts, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack
  • TECHNICAL NOTES: 3 inch front and 3 inch rear suspension lift. This Kit Includes 4x U-Bolts: 9/16" Threads, 10" Long x 3.5" Wide. Please note that spacer thickness to lift height is NOT a 1:1 ratio; it is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours without the need for special tools. An alignment is always recommended if you are altering the height of your vehicle. Please note: We recommend using a Coil Spring Compressor for easy removal and reinstallation of your springs.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.