5 In Lift Kit for Ford F150

ECCPP Leveling Lift Kit Strut Spacers Struts Shock Absorbers Assembly for Ford...
  • FITMENTS: Leveling kit for F-150, compatible with for Ford for F-150 2.7L 2015-2018, for Ford for F-150 3.3L 2018, for Ford for F-150 3.5L 2011-2018, for Ford for F-150 3.7L 2011-2014, for Ford for F-150 4.2L 2004-2010, for Ford for F-150 4.6L 2004-2010, for Ford for F-150 5.4L 2004-2010, for Ford for F-150 5L 2011-2018
  • BENEFITS: LEVELING KIT eliminates factory rake and perfectly levels the front with the rear of the vehicle. Gives a noticeably aggressive look to your truck. Provides additional fender clearance for larger tires and wheels. Maintains your original OEM ride quality, steering quality and driving comfort.
  • INCREASED SAFETY: LEVELING KIT for Ford for F-150 are Machine-manufactured precisely from 6061-T6 aircraft-grade aluminum billet, with heat-treated and hardened 10.9 grade bolts pre-installed. The anodized surface provides additional resistance to corrosion. Extraordinarily strong and light compared to spacers made of steel.
  • SIMPLE INSTALLATION: The LEVELING LIFT KIT comes with everything needed for 100% simple bolt-on installation. The process requires no strut pre-loading, cutting, or modifying any factory parts.
  • WARM TIPS: The lift height and kit thickness are not 1:1 due to suspension geometry. So the leveling lift kit's itself actual thickness less than lifting height.
Supreme Suspensions - Full Lift Kit for 1997-2003 Ford F-150 3" Front Lift...
  • COMPATIBLE WITH 1997 - 2003 Ford F150 (2WD). Does not fit Extended Cab models.
  • CONTENTS: (2x) Front Billet Aluminum Lift Spring Spacers, (2x) Rear High-Strength Steel Lift Blocks with Build-In Taper, (4x) Round Bend U-Bolts, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack
  • TECHNICAL NOTES: 3 inch front and 2 inch rear suspension lift. This Kit Includes 4x U-Bolts: 9/16" Threads, 10" Long x 3.5" Wide. Please note that spacer thickness to lift height is NOT a 1:1 ratio; it is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours without the need for special tools. An alignment is always recommended if you are altering the height of your vehicle. Please note: We recommend using a Coil Spring Compressor for easy removal and reinstallation of your springs.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
Supreme Suspensions - Full Lift Kit for 2004-2020 Ford F-150 [4WD] 2.5" Front...
  • COMPATIBLE WITH 2004 - 2020 Ford F-150 (4WD*). *Does NOT Fit FX4 and 2004 Heritage Models.
  • CONTENTS: (2x) T6 Billet Aluminum Front Lift Strut Spacers, (2x) High Strength Steel Rear Lift Blocks, (4x) Square Bend U-Bolts, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: 2.5 inch front and 1.5 inch rear suspension lift. *Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers.
  • INSTALLATION NOTE: 4WD models come with a 1.5" factory block installed, which will be replaced by our 3" lift block resulting in a 1.5" additional rear lift. *An alignment is always recommended if you are altering the height of your vehicle.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
Supreme Suspensions - 5" Rear Lift Blocks Kit for 1997-2003 Ford F-150 2WD 4WD -...
  • COMPATIBLE WITH 1997 - 2003 Ford F-150 (2WD 4WD). *For models with factory blocks pre-installed.
  • CONTENTS: (2x) Rear Steel Lift Blocks, Installation Instructions, Supreme Suspensions Pro Pack
  • TECHNICAL NOTES: 5" Tall Lift Blocks with 9/16th Axle Locator Pins. Rear Lift Height will vary depending on factory block size being replaced.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours. An alignment is always recommended after altering the height of your vehicle. NOTE: Longer U-bolts are required for installation - NOT included in this kit. Please see our other auctions for our complete rear lift kit.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. These are designed to take the abuse we know you going to give it off-roading or hauling. LAB Tests have shown these blocks can withstand an astonishing load of almost 60,000 lbs with no yielding or deformation observed!
AKM F150 Lift Kit 3" Front and 2" Rear Leveling Lift Kit for 2004-2018 Ford F150...
  • WARM TIP: This set will raise the front of the truck by 3" and the rear of the truck by 2". Suitable for for 2004-2018 Ford F150 4WD 2WD.
  • HIGH QUALITY: It is made of the same material as the aircraft, which is stronger compressive resistance than steel. High quality black anodized surface enhances corrosion resistance,more durable.
  • EASY INSTALLATION: It can be installed without removing the frame, and can be completed within 1-2 hours without using special tools.Although the thickness of the front lift block is 2", the height of the car front lift is 3", the thickness of the rear lift block is 3", but the height of the car rear lift is 2".Because the lifting height and kit thickness are not 1:1.
  • ADVANTAGES: Make the front and rear of the car level. Increase the distance between the frame and the ground,make the car look more perfect and cool.But it will never lessen your comfort level.
  • PRODUCTS INCLUDE: 3"Front lift spacers x2,2"Rear lift blocks x2,Zinc Plated U-bolts x4,Nut x8. Be free to contact us if you have any questions about anything.Thank you.
MotoFab Lifts F15-2.5 - 2.5 inch Front Leveling Lift Kit That is compatible with...
  • Will Raise the front of your truck by a true 2.5"
  • Motofab Lifts are CNC machined out of billet aluminum then powdercoated black to match your factory suspension.
  • Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits.
  • Made In The USA with a Lifetime warranty
  • Compatible with F150 2004-2018 2WD & 4WD
MotoFab Lifts F150-2 - 2 in Front Leveling Lift Kit That is compatible with F150
  • Will Raise the front of your truck by a true 2"
  • Motofab Lifts are CNC machined out of billet aluminum then powdercoated black to match your factory suspension.
  • Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits.
  • Made In The USA and a Lifetime warranty
  • Compatible with F150 2004-2019 2WD & 4WD
MotoFab Lifts F150-3F-2R 3" Front and 2" Rear Leveling lift kit for 2004-2014...
  • Will Raise your F150 3" in the front and 2" in the rear
  • Motofab Lifts are CNC machined out of billet aluminum then powdercoated black to match your factory suspension.
  • Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits.
  • Made In The USA with a Lifetime warranty
  • Fits 2004-2014 F150 4WD 2WD