Altronics Relay

Features a rugged 16A/250VAC relay rated at 5A/120VDC, 12VDC 10 amp output for solenoid control that will not burn out during prolonged operation. Designed for remote ON-OFF control of 12 volt power circuits from the ignition switch or other low current power source. This is generally used to turn on your smoke pump, fuel pump, power inverter, fuel accumulator tank etc.


Relay wide operating voltage range: 18-30v DC (60Hz). General purpose relay contacts rated 5A/120VAC and 10amp @12VDC continuous duty . The heavy duty molded plastic case with integral terminal block is ideal for easy mounting. Terminals accept wire sizes up to #10 gauge and is compatible with a wide variety of remote control sensors including photo-sensors, microswitches, water level etc.

It’s rated at 16A @ 250vac , 10Amps max continuous output power.(that’s the equivalent of running about 27 fans continuously) . That should be enough to run most anything you would need to run from your ignition switch or other low current source… The terminal block connects via two quick disconnect terminals that also snap right in, and are held together by small metal clips so it can be taken apart easily if needed. It has an on/off SPST rocker switch on top and as far as I know nothing else, but I’m sure you could find some way to hook something up to the contacts if needed.

The perfect solution for powering your APU/electrical system when driving your van or plug in vehicle. You can buy a relay with built in timer as well that will automatically turn off after X amount of time and then come back on again at set intervals so it cuts down on electricity usage while still allowing you to power certain things from your car even while not using any battery power (I think they are like $18-20 more though) . But this is good for just basic control of things like electric pumps, fans etc…

This one works great! It has lotsa juice to run whatever you need and does what its supposed to for a great price (currently $6.91 from Amazon and shipping is free with prime membership) . I have run my fuel pump, power inverter/charger, fans on it all at the same time without any problems . It has 3 terminals… red is positive voltage input to activate , black is negative wiring coming out of relay, and the other one is your output to whatever you are powering from. You can use this in combination with a mini toggle switch as well to cut off power from everything when not needed or just use it for small things like lighting etc…

This was exactly what I was looking for! Its simple enough that anyone could hook it up and makes doing so very easy.

Bestseller No. 1
ALTRONIX RBSN Relay Module, Factory Set for 12VDC Cut Jumper J1 for 24VDC Operation, 12VDC OR 24VDC SLECTABLE Operation, DPDT Contacts Rated at 2 AMP/120VAC/28VDC
  • 12VDC OR 24VDC SLECTABLE OPERATION
  • DPDT CONTACTS RATED AT 2 AMP/120VAC/28VDC
  • FACTORY SET FOR 12VDC CUT JUMPER J1 FOR 24VDC OPERATION
  • RELAY MODULE
  • Relay/Socket
Bestseller No. 2
Altronix Relay Module 6/12VDC 120Ma DPDT, Blue, 1 (RB5)
  • Country of manufacture: United States
  • Door and Cabinet Hinges & Hardware
  • Manufacturer: ALTRONIX
  • Item Package Weight: 3.01 pounds
Bestseller No. 4
HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger
  • The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
  • Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
  • Fault-tolerant design, even if the control line is broken, the relay will not move.
  • The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
  • The Module can be set by jumper high or low trigger.
Bestseller No. 5
5 Pack 40/30 AMP 12 V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN SPDT Bosch Style Automotive Relay
  • 12 AWG tinned copper wires for Pin 30, Pin 87, Pin 87a. Length: 5.1in
  • 16 AWG tinned copper wires for Pin 85, Pin 86. Length: 5.1in
  • 12v dc waterproof 5 wire relay (max 14v). 40 amp / 30 amp High switching capability
  • Excellent waterproof and dustproof ability, high quality in any weather conditions
  • Nominal Coil Voltage: 12 V DC; Coil Power: 1.8 W; Coil Resistance: 80 Ω; Must Operate Voltage: 6~8 V DC; Must Release Voltage: 0.6~3.6 V DC; Maximum Applied Voltage: 15.6 V DC
Bestseller No. 6
2pcs HOPUT 7866 Relay, D1780C GM Original Equipment Black Multi-Purpose Relay Fuel Pump Relay g8v-rh-1c7t-r-dc12
  • Work with vehicle electronics to help optimize vehicle capability.please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchasing.
  • This g8v rh 1c7t r dc12 relay is 5 prongs relay, please check the picture and description carefully to make sure you bought the right item. Please do not buy if your relay is not 5 prong or the pins' position is different from ours.
  • Fix DRL problem for some vehicles;Worked well on solving Tahoe window problems.Simple fix for intermittent unlock failure of the second row doors and tailgate
  • Used as headlight relays to make the low beams stay on when the high beams come on.(Personal needs)
  • Can be used as Fuel Pump Relay,24hours customer service.
Bestseller No. 7
EHDIS Car Relay 4 Pin 12v 40amp Spst Model No.: JD2912-1H-12VDC 40A 14VDC, Auto Switches & Starters,Pack of 2
  • Brand new heavy duty 4-prongs SPST relays
  • Use optional Relay Harness, or female Crimp Connectors
  • High 40A coil capacity- able to handle those high current applications with ease
  • Package Include: 2 x 40A 4-Pin 12V Vehicle Relays
  • Mechanical life of 10,000+ cycles
Bestseller No. 8
ELEGOO 4 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32 Raspberry Pi
  • This relay module is 5V active low. Relay output maximum contact is AC250V 10A and DC30V 10A.
  • Standard interface can be directly connected with microcontrollers.
  • Working status indicator lights are conducive to the safe use
  • 4-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other equipments with large current.
  • Widely used for all MCU control, industrial sector, PLC control, smart home control. For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW
Bestseller No. 9
Mobile Suit Gundam Altron Gundam Panda Tshirt, Long Sleeve, Sweatshirt, Hoodie
  • Click 'Customize Now' to Select the options of 'Style - Size - Color', which you would like before Adding to Your Cart.
  • CUSTOMIZE: We can customize all of our designs to your needs. Please feel free to contact us if you have any questions.
  • MATERIAL: Polyester and Cotton, breathable, the fabric is stretchy, which makes it light and ideal for summer weather. It’s durable and can be worn all day or used to sleep in.
  • MADE IN THE USA: We say that with pride. Supremely soft, superior quality. Modern, slightly fitted shape.
  • GUARANTEES: If you have any issue, please send the email that comes with the product for a Replacement or Refund within 14 Days Warranty. It is our intention to offer the best items and service on Amazon.
Bestseller No. 10
Delay Relay Module, DROK DC 6-30V Timer Relay 12V 24V 0.01s-9999min 50mA Digital Timer Cycle Delay Switch Module AC 220V Power On-Off Controller with LCD Display Switch Button Case
  • SPECIFICATION --- working voltage DC 6-30V; timing range 0.01s-9999mins continuously adjustable.
  • TRIGGER --- support high level support, low level trigger, button trigger control, switching value control, available for most applications.
  • INDEPENDENT PARAMETER --- able to set different OP, CL, LOP parameters which are independent and saved separately; support viewing currently set parameters without affecting system operation.
  • OTHER FEATURES --- clear LCD display; support UART data uploading and parameter setting; with pause button, support one-button pause; with automatically sleep mode; with input reverse connection protection; with power-off auto storage function.
  • NOTE --- no trigger cable or connector included, need to be purchased separately.