Cam Phaser Locking Tool for Ford Rotunda 5.4L 4

Cam Phaser Locking Tool and Crankshaft Positioning Tool Crankshaft Wrench Holder...
  • FITMENT(Crankshaft Positioning Tool):1993 and newer 4.2L/4.6L 2-valve engines,4.6L 4-valve and 5.4L and 6.8L V-8 engines.
  • FITMENT(Cam Phaser Locking Tool):Expedition 5.4L 3V 2005-2011;Explorer 4.6L 3V 2006-2010;F-150 5.4L 3V 2004-2010;F-250/350/450/550 5.4L 3V 2005-2009.Mark LT 5.4L 3V 2006-2008;Mountaineer 4.6L 3V 2006-2010.Mustang 4.6L 3V 2005-2010;Navigator 5.4L 3V 2005-2012.Similar to Rotunda 303-448,6024,525219.
  • MATERIAL And DESIGN(Cam Phaser Locking Tool):Hardened chrome molybdenum steel,resistance on rust,deformation and crack.Designed with a triangle shape with four holes to perfectly fits for your cam phaser.It is a quite available accessory to make you do the phaser job with ease.
  • USAGE(Crankshaft Positioning Tool):This tool slides easily over the crankshaft and seamlessly locks into place with the Wood ruff key.You only need to rotate the crankshaft with tool attached to crank so that the slot in the handle locks into the engine cover alignment dowel pin,ensuring the engine is at the correct TDC point avoiding extreme damage and costly repairs.
  • CORRECT INSTALLATION POSITION(Crankshaft Positioning Tool):Easily installs over the crankshaft and engine front cover alignment dowel to position the crankshaft at top-dead-center.
Y-autopart Cam Tool Complete Combo Kit - Cam Phaser Locking Tool for Ford...
  • Ford Engine Cam Tool Complete Combo Kit-Cam Phaser Locking Tool for Ford Rotunda 5.4L 4.6L 3V Timing Chain Locking Wedge Tool for Lincoln, Explorer Ford Crankshaft Positioning Tool combination.
  • Material:Made of hardened chrome molybdenum steel with long-lasting black oxide finish.Effective anti-rust/corrosion and deformation protection with strong toughness.Resist high and low temperature.
  • With this timing chain tool,make it easily camshaft or cam phaser changed on your vehicle without losing chain tension and without removing the timing cover.
  • Cam Phaser Locking Tool:Designed with a triangle shape with four holes to perfectly fits for your cam phaser, it is a quite available accessory to make you do the phaser job with easily.
  • Cam Phaser Lock Out Kit Noise Repair Tool:Can solve the noise problem.
Yoursme Cam Tool Crankshaft Positioning Wrench Holder and Cam Phaser Locking...
  • FITMENT: Cam Phaser Locking Tool is similar to Rotunda 303-448, 6024, 525219. Fits for Expedition 5.4L 3V 2005-2011; Explorer 4.6L 3V 2006-2010; F-150 5.4L 3V 2004-2010; F-250/350/450/550 5.4L 3V 2005-2009; Mark LT 5.4L 3V 2006-2008; Mountaineer 4.6L 3V 2006-2010; Mustang 4.6L 3V 2005-2010; Navigator 5.4L 3V 2005-2012.
  • CAM PHASER LOCKING TOOL: Saving your time and frustration on doing camshaft or cam phaser change job. Precision molding design ensures it perfectly fit for your cam phaser.
  • CRANKSHAFT POSITIONING TOOL: Fits for Ford 1993–newer 4.2L and 4.6L 2-valve engines, 1993–newer 4.6L 4-valve engines, and 1993–newer 5.4L and 6.8L V8 engines. Designed to align and hold the crankshaft of your car engine at Top Dead Center (TDC) for correct timing chain installation.
  • CAM TOOL COMPLETE KIT: Made of the hardened chrome molybdenum steel, this cam tool complete kit set has good resistance on rust, deformation and crack, which is quite available to service your engines with great durability.
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with this Cam Tool Complete Kit Set, simply return it for a full refund or replacement in 30 days, no questions asked money back guarantee.
SMOTIVEPRO 5pcs Cam Phaser Locking Tool Set,Engine Timing Repair Kit for Ford...
  • 【5PCS cam phaser locking tool Combination】This tool kit includes the cam phaser tool, Timing Chain Cheese or Wedge Tool, cam phaser lock hold tool Bracket and the 2x Cam Phaser Lockout Limiters.
  • 【Crankshaft Positioning Tool】The crankshaft positioning tool gets you the exact crankshaft position everytime.
  • 【Timing Chain Wedge Tool】The timing chain wedge tool holds the chain in position to allow removal of cam phasers without removing the timing chain.
  • 【Applications】Apply to Ford 1993–newer 4.2L and 4.6L 2-valve engines, 1993–newer 4.6L 4-valve engines, and 1993–newer 5.4L and 6.8L V8 engines.
  • 【Necessary Auto Repair Tools】Replacement Engine Timing Repair Kit Tool - Correct engine camshaft and crank shaft are critical for the engine to work properly.
for Ford 4.6L/5.4L/6.8L 3V Engine Timming Service Tool Kit with Crankshaft...
  • 【MUST HAVE TOOLS】This cam repair tool complete combo kit make your job a lot easier and much time-saving. Make it more convenient for you to repair engine timing parts, and equipped with part of the correct timing replacement parts which Eliminates Ticking Noise Caused By Failing Cam Phasers
  • 【Crankshaft Positioning tool】Similar to Rotunda 303-448, T93P-6303-A, 6024 & 525219. works for Ford 1993–newer 4.2L and 4.6L 2-valve engines, 1993–newer 4.6L 4-valve engines, and 1993–newer 5.4L and 6.8L V8 engines
  • 【Cam Phaser Holding/Locking Tool】Similar to Ford 303-1046, OTC 567614. Works for Ford Rotunda 5.4L 4.6L 3V; Expedition 5.4L 3V 2005-2011; Explorer 4.6L 3V 2006-2010; F-150 5.4L 3V 2004-2010; F-250/350/450/550 5.4L 3V 2005-2009; Mark LT 5.4L 3V 2006-2008; Mountaineer 4.6L 3V 2006-2010
  • 【Timing Chain Locking Tool】 Similar to OTC 567617. Works on 2005 – 2012 5.4L 3V Expedition, Navigator; 2006 – 2010 4.6L3V Explorer, Mountaineer; 2009 – 2010 4.6L3V F-150; 2004 – 2010 5.4L 3V F-150; 2006 – 2014 6.8L F-53 Motorhome Chassis; 2011 – 2012 6.8L 3V F-59 Commercial Stripped Chassis; 2005 – 2009 5.4L 3V F-Super Duty 250-550; 2005 – 2009 6.8L 3V F-Super Duty 250-550; 2006 – 2008 5.4L 3V Mark LT; 2005 – 2010 4.6L 3V fit for Mustang
  • 【Cam Phaser Lock Out Kit & Bolts】Works on Ford 5.4L and 4.6L 3 Valve Engines. Fits Factory OEM Cam Phasers ONLY. These particular lockouts will only fit factory phasers made by Ford. If you have a phaser that is manufactured by an aftermarket manufacturer, these lockouts will not fit
MOEBULB Cam Tool Complete Combo Kit Compatible for Ford 4.6L/5.4L 3V Engine Cam...
  • Fitment : Cam Tool Complete Combo Set Compatible for timing chain or cam phaser work for your Ford 4.6L/5.4L 3V Engines
  • Cam Phaser Holding Tool: for Ford Rotunda 5.4L 4.6L 3V; Expedition 5.4L 3V 2005-2011; Explorer 4.6L 3V 2006-2010; F-150 5.4L 3V 2004-2010; F-250/350/450/550 5.4L 3V 2005-2009; Mark LT 5.4L 3V 2006-2008; Mountaineer 4.6L 3V 2006-2010; Mustang 4.6L 3V 2005-2010; Navigator 5.4L 3V. Made from hardened chrome molybdenum steel with black oxide finish, this cam phaser tool is effective for rust, corrosion and deformation protection with strong toughness to make you do the phaser job with ease.
  • Crankshaft Positioning tool: for Ford 1993–newer 4.2L and 4.6L 2-valve engines, 1993–newer 4.6L 4-valve engines, and 1993–newer 5.4L and 6.8L V8 engines. Fabricated from structural steel and coated with long-lasting black oxide finish, this ford crankshaft tool is for necessary removing the cylinder heads if the crankshaft is rotated during timing chain installation (Jumped Timing), to reduce the significant damage for Pistons and Valves.
  • Timing Chain Locking Tool: for Lincoln Mercury 2005-2014 vehicles with 5.4L/4.6L 3V engines; Navigator, Ford Mustang, F-150, Super Duty, F-250/350/450/550, Explorer, Mountaineer, Sport Trac, Expedition. Consists of firm metal rod and hard lemon yellow plastic wedge, this timing chain tool is a quite available accessory to service your engines with great durability. It makes easily camshaft or cam phaser changes on your vehicle without losing chain tension and removing the timing cover.
  • Package Included: 1pcs Cam Phaser Holding Tool ,1pcs Crankshaft Positioning Wrench Holder,1pcs Timing Chain Locking Wedge Tool
EnRand Cam Tool Set for Ford 4.6L/5.4L/6.8L 3V Engine-Cam Phaser Locking Tool...
  • 🛠️Fitment:Ford 4.6L/5.4L/6.8L 3V V8 V10 engines used in Mustang,F-Series,Rotunda,Expedition,Lincoln Navigator, Explorer, Mark LT, Mountaineer, F-Series trucks and Tool set covers 1 cylinder head application!More fitment detail please reading the Product description below.
  • 🛠️Cam Phaser Locking Tool :make easy camshaft or cam phaser changes on your vehicle without losing chain tension and without removing the timing cover
  • 🛠️Timing Chain Locking Wedge Tool :When doing camshaft/phraser work, push down on this tool and wiggle to set it as deep as possible, then pull up a little (the chain will come up with the tool), and you then have extra wiggle room for removing phasers
  • 🛠️The Cam Phaser Locking Tool are Fabricated from hardened chrome molybdenum steel with long-lasting black oxide finish. And the Hard plastic on the end of Timing Chain Locking Wedge Tool resists damage from the timing chain; Firm metal rod allows the wedge to get deep enough to do the job effortlessly
  • 🛠️Tool set covers 1 cylinder head application
for Ford 4.6L/5.4L/6.8L 3V Engines Repair Tools Kit - Valve Spring Compressor,...
  • 【MUST HAVE TOOLS】This cam repair tool complete combo kit make your job a lot easier and much time-saving. Allows you to replace rocker arms, lash adjusters, and other valve components without removing the camshaft. Easy to replace timing kit-camshaft, cam pasher, crankshaft, timing chain and others
  • 【Valve Spring Compressor tool】 Same as OTC 6684, Rotunda 303-1039. Works on Explorer/Mountaineer/Sport Trac, Expedition/Navigator, F-150, F-Super Duty 250/350/450/550/650/750 and Mustang with Ford 4.6 5.4 and 6.8 3V engines
  • 【Crankshaft Positioning tool】Similar to Rotunda 303-448, T93P-6303-A, 6024 & 525219. works for Ford 1993–newer 4.2L and 4.6L 2-valve engines, 1993–newer 4.6L 4-valve engines, and 1993–newer 5.4L and 6.8L V8 engines
  • 【Cam Phaser Holding/Locking Tool】Similar to Ford 303-1046, OTC 567614. Works for Ford Rotunda 5.4L 4.6L 3V; Expedition 5.4L 3V 2005-2011; Explorer 4.6L 3V 2006-2010; F-150 5.4L 3V 2004-2010; F-250/350/450/550 5.4L 3V 2005-2009; Mark LT 5.4L 3V 2006-2008; Mountaineer 4.6L 3V 2006-2010
  • 【Timing Chain Locking Tool】Similar to OTC 567617. Works on 2005 – 2012 5.4L 3V Expedition, Navigator; 2006 – 2010 4.6L3V Explorer, Mountaineer; 2009 – 2010 4.6L3V F-150; 2004 – 2010 5.4L 3V F-150; 2006 – 2014 6.8L F-53 Motorhome Chassis; 2011 – 2012 6.8L 3V F-59 Commercial Stripped Chassis; 2005 – 2009 5.4L 3V F-Super Duty 250-550; 2005 – 2009 6.8L 3V F-Super Duty 250-550; 2006 – 2008 5.4L 3V Mark LT; 2005 – 2010 4.6L 3V Mustang
TR DIESEL Cam Tool Crankshaft Positioning Wrench Holder and Cam Phaser Locking...
  • Crankshaft Positioning Tool Providing the effective protection to pistons and valves if the crankshaft rotates during disassembly and assembly. A necessary tool to simplify your engine work. Works for Ford 1993–newer 4.2L and 4.6L 2-valve engines, 1993–newer 4.6L 4-valve engines, and 1993–newer 5.4L and 6.8L V8 engines.
  • Cam Phaser Holding Tool designed with a triangle shape to perfectly fits for your cam phaser, it is a quite available accessory to make you do the phaser job with ease. Works for Ford Rotunda 5.4L 4.6L 3V; Expedition 5.4L 3V 2005-2011; Explorer 4.6L 3V 2006-2010; F-150 5.4L 3V 2004-2010; F-250/350/450/550 5.4L 3V 2005-2009; Mark LT 5.4L 3V 2006-2008; Mountaineer 4.6L 3V 2006-2010.
Engines Repair Tools Kit-Valve Spring Compressor Tool, Crankshaft Positioning...
  • This engine tool kit set is made of hardened chrome molybdenum steel with long-lasting black oxide finish.Effective anti-rust/corrosion and deformation protection with strong toughness.Resist high and low temperature.
  • Valve spring compressor tool for ford 4.6L 6.8L 3V,Similar to OE part number 6684 & Rotunda 303-1039. Allows a quick and easy service for Camshaft, Valve Seal, Valve Spring or Retainer.
  • Crankshaft positioning tool designs to align and hold the crankshaft of your Ford engine at TDC for correct timing chain installation. Cam Phaser Holding Tool saves your time and frustration on doing camshaft or cam phaser change job on your vehicle.
  • Cam phaser locking tool designed with a triangle shape with four holes to perfectly fits for your cam phaser.Timing chain locking tool is use to swap the camshaft or cam phaser work, push down the timing chain wedge tool between the timing chain and chain guides to maintain tension on the timing chain.
  • Crankshaft Pulley Bolt Same as Ford F5RZ-6A340-B, ensure the pulley and timing gears do not slip, it is a direct replacement part for Ford, Lincoln, Mercury vehicles.