Catback Exhaust System for a 1998 5.4 Ford F150

aFe 49-43043-P MACH Force XP Stainless Steel Cat-Back Exhaust System with...
  • 409 stainless steel
  • 3 inches
  • OE Hanger Locations
  • Mandrel bent
  • Polished tip
Flowmaster 817663 American Thunder 409S Dual Rear/Side Exit Cat-Back System with...
  • Stainless Steel Construction
  • Multiple Exit Styles Provided in Kit
  • Aggressive Sound Performance Tone
  • Lifetime Limited Warranty
Flowsound 2-Chamber Mandrel-Bent Dual Truck Exhaust Kit with Chrome Tips
  • single 3"/dual 2.5" Flowsound 2-Chamber Muffler
  • Two 2.5" Mandrel-bent tailpipes, cut and swedged
  • Two 3.5"x18" WELD-ON angle-cut chrome tips
  • Multi-depth insulated hangers & muffler clamps
Gibson 619995 Stainless Steel Single Exhaust System
  • Exits Behind Rear Tire; Incl. Muffler/Pipes/Stainless Tip
  • Superflow Performance T-304 Stainless Muffler, fully welded, Not packed or screened, nothing to blow out
  • Superflow Performance T-304 Stainless Muffler, fully welded, Not packed or screened, nothing to blow out
  • T-304 Stainless Steel Clampless Slash Tip
  • Lifetime Limited Warranty
USA Standard Gear (ZK F8.8) Ford 8.8" Diff Master Overhaul Kit
  • USA Standard Master Overhaul kits let you finish your install with confidence
  • This kit uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
  • Fits 2009 and down Ford 8. 8"
Flowmaster Super 44 Mandrel-Bent Aluminized Dual Truck Exhaust Kit w/Chrome Tips...
  • Performance Dual Exhaust for Ram, Ford F-Series, Silverado & Sierra trucks
  • Single 3" inlet /Dual 2.5" outlet Flowmaster Super 44 Muffler
  • Two 2.5" high-flow mandrel-bent tailpipes, cut and swedged
  • Two 3.5"x18" WELD-ON angle-cut chrome tips
  • Multi-depth insulated hangers & muffler clamps
Glasspack Mandrel-Bent Dual Truck Exhaust Kit with Chrome Tips
  • single 3" inlet/dual 2.5" outlet Glasspack Muffler
  • Two 2.5" Mandrel-bent tailpipes, cut and swedged
  • Two 3.5"x18" WELD-ON angle-cut chrome tips
  • Multi-depth insulated hangers & muffler clamps
Fits Ford F-150 - High-Performance Tuner Chip and Power Tuning Programmer -...
  • FITS FORD F-150 - The Power Tune arrives pre-loaded with custom dyno proven tuner technology that increases horsepower and torque!
  • HOW IT WORKS - The Power Tune simply plugs into the OBD port of your vehicle. It then safely optimizes the ignition spark advance, air to fuel ratios and transmission shifting for the ultimate horsepower and torque gains. This results in increased throttle response, low end torque and acceleration!
  • EASY 5 MINUTE INSTALL - Tuning your vehicle is so easy anyone can do it, simply plug the Power Tune into your vehicle's OBDII port to unleash hidden power, no mechanical skills needed!
  • GUARANTEED SAFE - The module never overwrites factory data and always preserves your warranty coverage. If for some reason you remove the tuner, no one will ever know it was installed.
  • OUR PROMISE - If for any reason you are not 100% satisfied with your Power Tune Chip, we offer a full money back guarantee, no questions asked. Buy now RISK-FREE.
Flowmaster Super 40 Mandrel-Bent Dual Truck Exhaust Kit with Chrome Tips
  • single 3"/dual 2.5" Flowmaster Super 40 Muffler
  • Two 2.5" Mandrel-bent tailpipes, cut and swedged
  • Two 3.5"x18" WELD-ON angle-cut chrome tips
  • Multi-depth insulated hangers & muffler clamps