Coil Spacer Lift for a Ford Ranger

Supreme Suspensions - 2" Front Leveling Kit for 1983-1996 Ford Ranger /...
  • COMPATIBLE WITH 1983 - 1996 Ford Ranger (2WD), 1991 - 1994 Ford Explorer (2WD) and 1980 - 1996 Ford Bronco (2WD). *Does NOT fit special XL Model, Extended Cabs or vehicles with Twin I-Beam Suspension.
  • CONTENTS: (2x) High Density Delrin Coil Spring Spacers, (2x) 3/4" Stud Extenders, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: 2 inch front suspension leveling lift.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. *An alignment is always recommended after altering the height of your vehicle.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
WULF 2.5" Front 2" Rear Leveling Lift Kit compatible with 1998-2012 Ford Ranger...
  • Compatible with 1998-2012 Ford Ranger 2WD with Coil Spring Suspension
  • FRONT: 2.5" Lift Solid Aluminum Coil Spring Spacers
  • REAR: 2" Lift Ductile Cast Steel Angled Blocks, (4) Zinc Coated U-bolts, Hardware Included
  • NOTE: 2WD models only. Requires coil spring suspension. Strut Spacers are not a 1:1 ratio regarding physical thickness to the amount of lift, they will lift the advertised amount Please see the description for full details, or contact us for assistance
  • Fast Shipping. Manufacturers Lifetime Warranty. Dedicated Customer Service
WULF 2.5" Front Leveling Lift Kit compatible with 1998-2012 Ford Ranger 2WD with...
  • Compatible with 1998-2012 Ford Ranger 2WD with Coil Spring Suspension
  • FRONT: 2.5" Lift Solid Aluminum Coil Spring Spacers
  • REAR: Check out our store for complete front kits and parts
  • NOTE: 2WD models only. Requires coil spring suspension. Strut Spacers are not a 1:1 ratio regarding physical thickness to the amount of lift, they will lift the advertised amount Please see the description for full details, or contact us for assistance
  • Fast Shipping. Manufacturers Lifetime Warranty. Dedicated Customer Service
3" Lift Front Coil Spring Spacer Set for Dodge, GM & Ford Passenger Cars &...
  • These coils spacers are designed to lift the front of your vehicle anywhere from 2-1/2" to 3" when placed under the front coil springs.
  • Corrects a Sagging Front End Due to Heavier Engine or Lowering Springs
  • Fits 60's thru 70's AMC, GM & Ford Passenger Cars
  • Also Fits 60's thru 00's Chevy, Dodge, Ford & GMC 2WD Trucks
  • Made in USA!
WULF 2.5" Front 1.5" Rear Leveling Lift Kit compatible with 1998-2012 Ford...
  • Compatible with 1998-2012 Ford Ranger 2WD with Coil Spring Suspension
  • FRONT: 2.5" Lift Solid Aluminum Coil Spring Spacers
  • REAR: 1.5" Lift Ductile Cast Steel Blocks, (4) Zinc Coated U-bolts, Hardware Included
  • NOTE: 2WD models only. Requires coil spring suspension. Strut Spacers are not a 1:1 ratio regarding physical thickness to the amount of lift, they will lift the advertised amount Please see the description for full details, or contact us for assistance
  • Fast Shipping. Manufacturers Lifetime Warranty. Dedicated Customer Service
Supreme Suspensions - Front Leveling Kit for Ford Ranger [4x4] 2 Inch Front...
  • COMPATIBLE WITH 1983 - 1996 Ford Ranger (4WD). *Will NOT fit vehicles with Twin Traction Beam Suspension.
  • CONTENTS: (2x) Solid Aircraft Billet Coil Spring Spacers, (2x) 5/8" Stud Extenders, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: 2 inch front suspension leveling lift. Factory shocks can be reused without compromising ride quality.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. An alignment is recommended after install.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Improves axle alignment and eliminate vibrations in the driveline.
2" Lift Front Coil Spring Spacer Set for Dodge, GM & Ford Passenger Cars &...
  • These coils spacers are designed to lift the front of your vehicle anywhere from 1-7/8" to 2-1/4" when placed under the front coil springs.
  • Corrects a Sagging Front End Due to Heavier Engine or Lowering Springs
  • Fits 60's thru 70's AMC, GM & Ford Passenger Cars
  • Also Fits 60's thru 00's Chevy, Dodge, Ford & GMC 2WD Trucks
  • Made in USA!
Supreme Suspensions - Front Leveling Kit for 1981-1996 Ford F150 [2WD] 1.5 Inch...
  • COMPATIBLE WITH 1981 - 1996 Ford F-150 (2WD). *Will NOT fit vehicles with Twin I-Beam Suspension.
  • CONTENTS: (2x) Solid Aircraft Billet Coil Spring Spacers, (2x) 3/4" Stud Extenders, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: 1.5 inch front suspension leveling lift. Factory shocks can be reused without compromising ride quality.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. An alignment is recommended after install.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Improves axle alignment and eliminate vibrations in the driveline.
RTZ - Compatible with Ford Ranger Pickup 01-13 Full Lift Kit 4" Front Lift Iron...
  • Limited Life-Time Warranty
  • Direct Drop-in & Bolt-on Installation. No welding, or other parts needed. Just an alignment after the installation!
  • Improves appearance of your pickup and maintains comparable factory ride.
  • (NOTE:WILL "NOT" FIT MODELS WITH STABILITRAK/ADVANCETRAC CONTROL)
  • Compatible with 2001-2013 Ford Ranger Pickup 2wd 4 or 6 Cylinder Motor (NOTE: FITS 2WD COIL SPRING SUSPENSION ONLY**WE HAVE OTHER LISTINGS FOR TORSION SUSPENSION). Includes: Pair of 4" lift Spindles and Rear 4" blocks kit with Sae Grade Hardware. Decal included. (Check our other auctions for the SPORT, EDGE & 4WD offers)
RTZ - Compatible with Ford Ranger Pickup 01-13 Full Lift Kit 4" Front Lift Iron...
  • Limited Life-Time Warranty
  • Direct Drop-in & Bolt-on Installation. No welding, or other parts needed. Just an alignment after the installation!
  • Improves appearance of your pickup and maintains comparable factory ride.
  • (NOTE:WILL "NOT" FIT MODELS WITH STABILITRAK/ADVANCETRAC CONTROL)
  • Compatible with 2001-2013 Ford Ranger Pickup 2wd 4 or 6 Cylinder Motor. (NOTE:WILL FIT COIL SUSPENSION ONLY)Includes: Pair of 4" lift Spindles and Rear 3" blocks kit with Sae Grade Hardware. Decal included. (Check our other auctions for the SPORT, EDGE & 4WD offers)