Exhaust for 1998 Ford Mustang 3.8

Walker 35337 Hardware Clamp
  • Walker offers a variety of clamp styles and sizes for your installation needs
  • Helps to ensure a leak-free connection
  • Constructed from durable and robust material for long life
  • New Walker accessories help to ensure effective exhaust repairs
  • Walker supplies all of the accessories you need to do the complete exhaust job
ENA Ignition Coil Pack Compatible with Ford Mazda Mercury Windstar Mustang...
  • ENA Ignition Coils are engineered for original equipment and replacement applications. Every component either matches or improves on the OE design to ensure fast and easy installation with superior performance and reliability
  • Reduces common ignition coil issues such as; no/hard start, long crank time, misfires, lack of power, inconsistent transmission shifts, spark plug fouling, premature catalytic converter failure, poor fuel economy, check engine light illumination
  • Designed and manufactured to operate reliably under all operating conditions and throughout the entire engine speed range for peak engine performance
  • ENA products are designed to meet or exceed OE specifications in form, fit and function
  • 1 Year Limited Warranty - Please use enter your vehicle in your Amazon Garage above to see if this part is compatible with your vehicle
Spec-D Tuning N1 4" Burnt Tip Muffler Exhaust 2.5" Inlet Universal with...
  • ✔️ All of Our Items are 100% In Original Packaging! You Will Never Receive a Used Item From Us!
  • ✔️ Items are Exactly the Same as Shown in the Images! You Will Receive the Exact Item You Purchased!
  • ✔️ Installation Made Easy on All of Our Items! Little to No Modifications needed at Best!
  • ✔️ 30 Days Refund & 90 Days Defective Item Replacement Warranty! Any Issues With Your Item Please Call/Email Us and We Will Help You!
  • ✔️ Fitment: Fit For All Vehicles With 2.5" Exhaust Pipe
JUSTTOP 2" x 50' Titanium Universal Exhaust Heat Insulation Tape with Stainless...
  • Titanium packaging materials are stronger and more durable than most packaging materials, thereby improving thermal performance and reliability.
  • Using this product can increase the power of the exhaust pipe and save fuel appropriately, reducing the spontaneous combustion accidents caused by the oil leakage in the engine oil pipe and the high temperature of the banana.
  • The exhaust heat wrap tape can withstand 1400F direct/2000F radiant heat.
  • Package includes one 2 inch X 50 feet Heat Wrap with ( pack of 8 ) 12" and( pack of 8 )8" Stainless Steel Locking Zip Ties.
  • Universal fitment for cars and motorcycles performance parts. Like Honda, Yamaha, Suzuki, Harley and More.NOTE: It is recommended to immerse the cloth in water and wear gloves to install.
LivTee 120pcs Retainer Clips Push Type Retainers 6.3mm 8mm 9mm 10mm Expansion...
  • 4 Hole sizes from 6.3mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ). Six kinds of different push pin rivet for many brand vehicles.
  • High-quality nylon material: These car clips are made of high-quality black nylon material, which has anti-wear and anti-corrosion effects. This push-in cage kit will not easily break or rupture during use.
  • Wide range of applications: Push-in cage kits, with 12 common sizes, widely used in automotive panels, decorative panel clips, door trim clips, door panel clips, bumper clips, fender panel clips, hoods The replacement of the splash plate holder is common to most models and is fit for Ford Toyota Acura GMC Chrysler Lexus etc.
  • Easy to install: The product is equipped with a screwdriver, easy to operate, easy to install and remove. Small size, easy to store or carry around.
  • BUY WITH CONFIDENCE: Any other problem please feel free to contact us, we are always here to satisfy all of you.
KeylessOption Keyless Entry Remote Control Car Key Fob Replacement for GQ43VT4T
  • Fully tested complete remote with a battery installed
  • DIY step by step programming instructions included
  • Replaces GQ43VT4T
  • KeylessOption Warranty Card Included with each purchase
  • This is a replacement part to match the original in form and function
Spec-D Tuning Dual 3" Dtm Titanium Exhaust Muffler
  • ✔️ All of Our Items are 100% In Original Packaging! You Will Never Receive a Used Item From Us!
  • ✔️ Items are Exactly the Same as Shown in the Images! You Will Receive the Exact Item You Purchased!
  • ✔️ Installation Made Easy on All of Our Items! Little to No Modifications needed at Best!
  • ✔️ 30 Days Refund & 90 Days Defective Item Replacement Warranty! Any Issues With Your Item Please Call/Email Us and We Will Help You!
  • ✔️ FITMENT: Universal Size: 23"L x 8"W x 6"H Outlet Tip: 3" Inlet Tip: 2.5" ( Diameter ) Outlet Tip Length: 8" Inlet Tip Length: 2"
DNJ EV4120 Exhaust Valve for 1996-2008 / Ford, Mercury/Cougar, E-150, E-150,...
  • THIS IS BRAND NEW: DNJ® Exhaust Valve
  • FITS: 96-08 Ford, Mercury 3.8L-4.2L V6 OHV Naturally Aspirated
  • FITMENT NOTES: Nitride Coated, 3 Groove, 37.1mm Head Dia., 6.96mm Stem Dia., 123.1mm O.A.L., Exhaust
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks.
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run
Jones Exhaust FLX2004N
  • Jones Exhaust FLX2004N