Front Axle Seals for Ford F250 4X4 2001

OTC 6695 Axle Shaft Seal Installer for Ford 1998-2004 F-250/350/450/550
  • Works on 1998-2004 Ford F-250 F-350 F-450 and F-550 4X4s having the vacuum-operated front axle
  • Correctly installs the seal onto the axle shaft and into the wheel knuckle
  • Prevents front hub vacuum leaks that would cause the 4WD to not engage
Detroit Axle - 4WD SRW Front Wheel Hub Bearing Ball Joints Inner and Outer Tie...
  • For - 1999 Ford F-350 Super Duty (SRW; (Coarse Threads); From 03/22/99 - 4x4 Only w/ABS) - [2000-2004 Ford F-350 Super Duty (SRW; (Coarse Threads); - 4x4 w/ABS)] - 1999-2004 Ford F-250 Super Duty (SRW; (Coarse Threads); From 03/22/99 - 4x4 Only w/ABS) - [2000-2002 Ford Excursion ((Coarse Threads) - 4x4 w/ABS)]
  • Kit Includes: (2) Front Wheel Hub and Bearing Assembly, (2) Lower Ball Joints, (2) Upper Ball Joint, (2) Inner Tie Rods and (2) Outer Tie Rods
  • Hub Specifics: 8-Lug Count, with ABS, 4WD Only, Coarse Threaded Lugs on Bolts - Look at the Bolts the Lug Nuts Ride On - They Must Be Coarse Threaded!
  • Hubs are designed to meet stringent fatigue requirements to reduce premature failed; seals material and design are optimized to perform in hard environments
  • 10-Year Warranty
Detroit Axle - DRW 4x4 w/ABS Front Wheel Hub and Bearing Assembly Replacement...
  • Replacement for Dual Rear Wheels (Coarse Threads); 4x4 Models with ABS Only
  • Replacement for 1999 2000 2001 2002 2003 2004 Ford F-250 F-350 F-450 F-550 Super Duty - Built After 03/22/1999
  • Kit Includes: 2x Front Wheel Hub and Bearing Assemblies
  • Hub Specifications: Position: Front| Lugs: 8 Bolt| ABS Type: Sensor Wire| Flange Type: 4-Bolt Square
  • 10 Year Warranty.
Axle Shaft Seal Installer Tool for 1998-2004 Ford F-250 F-350 F-450 F-550...
  • Save Time and Money -This Job Can Be Easily with this tool
  • Correctly installs the seal onto the axle shaft and into the wheel knuckle
  • Prevents front hub vacuum leaks that would cause the 4WD to not engage
  • Fits 1998 1999 2000 2001 2002 2003 2004 Excursion F-250 F-350 F-450 F-550 4x4 trucks with vacuum-operated front axle
  • Replaces OE# 6695 - 205-429 T83T-3132-A1 Installs Seal# F81Z-3254-CB
National Oil Seals 710493 Axle Shaft Seal
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
  • Low swell in hydrocarbon fluids
Spicer 2014835 Axle Shaft Seal
  • package height : 22.6 cm
  • package length : 7.5 cm
  • package width : 21.9 cm
  • Product type : AUTO PART
Spicer 50491 Axle Shaft Seal
  • Spicer genuine OE replacement
  • Genuine Spicer axle shaft seal
  • Ford f-250 super duty 2004-99, f-350 super duty 2004-99, f-450 super duty 2004-99, f-550 super duty 2004-99
Axle Shaft Seal Installer - Compatible with Ford Vehicles - 1998-2004 F-250,...
  • Replacement Axle Shaft Seal Installer - This special tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly. This is applicable for your 1999 F-250, 2000 F-350, 2001 F-450, 2002 F-550 and 2003 Excursion 4x4 vehicle.
  • Compatible Replacement for Ford Vehicles - 2000, 2001 , 2002, 2003, 2004 Excursion 4x4 | 98, 99, 00, 01, 02, 03, 04 F250 | 98, 99, 00, 01, 02, 03, 04 F350 | 98, 99, 00, 01, 02, 03, 04 F450 | 1998, 1999, 2000, 2001, 2002, 2003, 2004 F550 |. Replacement of the axle shaft seal is necessary after removal when servicing the front-end parts like the u-joints to avoid having issues when engaging 4WD. Installation can be tricky and with a proper tool like this, it will be perfect everytime.
  • Replaces Part# 6695 commonly found on popular vehicles including year models 1998, 1999, 2000, 2001, 2002, 2003, 2004. This axle shaft seal tool is constructed with high quality steel, black finished and designed with handle and the correct ridges compatible with Ford vehicles. This is applicable to your Excursion 4x4, F-250, F-350, F450 and F-550 vehicles only.
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Vacuum seals delicately works with the axle shaft and this axle shaft seal tool is produced to ensure proper installation to the wheel knuckle assembly, prevents damages on the new seal, saves time and a lot easier.
  • Lifetime Warranty - This vacuum seal installer comes complete with a lifetime warranty. If the part ever fails on your 01 Excursion, 2003 F250, 99 F350, 04 F450 or 1998 F550 simply contact us for a replacement. Save time and money off of dealer prices by purchasing this part and taking advantage of our warranty.
6697 Wheel Knuckle Vacuum Oil Seal Installer Fit for Ford 2005-2019 F-250/350
  • FITMENT: Fit for Ford 2005-2019 F-250/350 4X4s having the vacuum-operated front axle. Similar to OTC 6697
  • HIGH QUALITY: Machined from Heavy Duty Steel for great anti-corrosion and durability
  • APPLICATION: Installing the seal onto the axle shaft and into the wheel knuckle, this tool makes seal replacement much easier
  • A MUST-HAVE TOOL: Prevents front hub vacuum leaks that would cause the 4WD not engage
  • 100% SATISFACTION: If you're not 100% satisfied with our Oil Seal Installer Tool, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty