Front Leveling Kit for Ford F150

MotoFab Lifts F15-2.5 - 2.5 inch Front Leveling Lift Kit That is compatible with...
  • Will Raise the front of your truck by a true 2.5"
  • Motofab Lifts are CNC machined out of billet aluminum then powdercoated black to match your factory suspension.
  • Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits.
  • Made In The USA with a Lifetime warranty
  • Compatible with F150 2004-2018 2WD & 4WD
ZY Wheel Front Leveling Lift Kit Strut Spacers Compatible for 2004-2021 Ford...
  • Will raise your truck 2.5" in the front, the ratio between lift height and kit thickness is not 1:1. The actual thickness of the kit not 2.5''.
  • Compatible for 2004-2021 Ford F150 2WD and 4WD, 2003 - 2017 Ford Expedition (2WD 4WD), 2005 - 2008 Lincoln Mark LT (2WD 4WD)
  • Perfectly levels the front with the rear of the vehicle. Gives a noticeably aggressive look to your truck. Provides additional fender clearance for larger tires and wheels.
  • Package included: 2.5'' Front Billet Aluminum Struct spacers as pictures show
  • Easy Install:Can be installed in about 1-2 hours and does not require strut/coil disassembly like other kits.
MZS Leveling Kit 2" Front Lifts Compatible with 1981-1996 F Series 150 |...
  • MZS Leveling Kit are CNC machined out of billet aluminum.Stud extenders are 3/4".
  • IMPORTANT : Will raise the front of the truck by a true 2",but the thickness of spacer is less than 2".Spacer thickness to lift amount is NOT a 1 to 1 ratio.
  • INSTALLATION : Easy bolt-on installation,takes 1 to 2 hours without the need for special tools.
  • NOTICE : Only fit 2WD,will not fit special XL Model or Extended Cabs,will Not Fit vehicles with Twin I-Beam Suspension.An alignment is recommended after install.
  • BENEFIT : Improve the stance of your vehicle,and provide additional fender clearance for larger tires and wheels.
BDFHYK Front Leveling Kit for Ford F150 3", 6061 T6 Aluminum Billet Strut...
  • 🚗 1.5", 2", 2.5" or 3" front suspension leveling lift kit compatible with 2004-2021 Ford F150 4WD/2WD, does not fit Raptor. 2003-2018 Ford Expedition, 2005 - 2008 Lincoln Mark LT. Does not fit 2004 Heritage.
  • ⚠️This leveling kit Will Raise the front of your truck by 1.5inch, 2inch, 2.5inch or 3inch, Improves the look of your vehicle and provides additional fender clearance for larger tires and wheels. With your truck's newly added height, your undercarriage will be a lot safer from damaging road obstacles. Please note that spacer thickness to lift height, not 1:1 ratio.
  • 💯 Strut lift spacers are CNC precision machined out of forged 6061 T6 aluminum, the adapter specially powder black coated for a great look that will offer better corrosion resistance and last the life. 12.9 grade solid bolts extremely strong and durable without compressing or warping over time.
  • 👍Bolt-on installation, convenient and easy. No disassembling strut coils assemblies and drilling, just install the leveling kit go on the top of the strut and fix it whit bolt.
  • ❤️Product Use: Generally, the car is not completely flat when driving on the road. Front lift kits are to raise the factory rake of your vehicle, make the front and rear of the car level. Increase the distance between the frame and the ground, make the vehicle look more perfect and cool. But it will never lessen your comfort level, making you more relaxed and enjoyable driving.
MotoFab Lifts F150-1.5 - 1.5 in Front Leveling Lift Kit That is compatible with...
  • Will Raise the front of your F150 by a true 1.5"
  • Motofab Lifts are CNC machined out of billet aluminum then powdercoated black to match your factory suspension.
  • Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits.
  • Made In The USA and and come with a Lifetime warranty
  • Compatible with 2004-2019 F150 2WD & 4WD
MotoFab Lifts F150-2 - 2 in Front Leveling Lift Kit That is compatible with F150
  • Will Raise the front of your truck by a true 2"
  • Motofab Lifts are CNC machined out of billet aluminum then powdercoated black to match your factory suspension.
  • Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits.
  • Made In The USA and a Lifetime warranty
  • Compatible with F150 2004-2019 2WD & 4WD
AKM F150 Lift Kit 3" Front and 2" Rear Leveling Lift Kit for 2004-2018 Ford F150...
  • WARM TIP: This set will raise the front of the truck by 3" and the rear of the truck by 2". Suitable for for 2004-2018 Ford F150 4WD 2WD.
  • HIGH QUALITY: It is made of the same material as the aircraft, which is stronger compressive resistance than steel. High quality black anodized surface enhances corrosion resistance,more durable.
  • EASY INSTALLATION: It can be installed without removing the frame, and can be completed within 1-2 hours without using special tools.Although the thickness of the front lift block is 2", the height of the car front lift is 3", the thickness of the rear lift block is 3", but the height of the car rear lift is 2".Because the lifting height and kit thickness are not 1:1.
  • ADVANTAGES: Make the front and rear of the car level. Increase the distance between the frame and the ground,make the car look more perfect and cool.But it will never lessen your comfort level.
  • PRODUCTS INCLUDE: 3"Front lift spacers x2,2"Rear lift blocks x2,Zinc Plated U-bolts x4,Nut x8. Be free to contact us if you have any questions about anything.Thank you.
2 inch Leveling Lift Kit Compatible with 2004-2020 F150,Leveling Lift Kit Fit...
  • ✫ NOTE: The thickness of the leveling Lift Kit is 1.3", it will raise the front of your F150 by 2". This is due to suspension geometry, the ratio of the lifting height to the thickness of the lift kit is not 1:1.
  • ✫ APPLICATIONS: 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 F150 2WD 4WD.
  • ✫ BENEFITS: (I) CNC automatic processing ensure high accuracy and stability(0.02mm) (II)6061-T6 aluminum forged alloymaterial. (III)High quality pre-installed heat treated 12.9 grade studs.
  • ✫ Easy Install: Installation can be completed within 1-2 hours and does not require strut/coil disassembly like other kits.
  • ✫ PRODUCT WARRANTY:All Richeer products are covered by the Richeer 2 year warranty to be free of defects in material and workmanship for two years from date purchased. If you have any questions or you are not satisfied with the product, welcome to contact us.
KAX 2.5" Front Leveling Lift Kit Fit for F150 2004-2021, 2.5 inch Leveling Kit...
  • Vehicle Specific: the 2.5 inch leveling kits fit for f150 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004.
  • Looks more aggressive : This kit improves the look of your vehicle by lifting the front of your truck to even out the overall body of the vehicle. It can be helpful to go off road or to a snowplow or trailer.
  • Increases ground clearance: After installing our 2" leveling kit, your tires will no longer be rubbed. It allows you to fit larger custom rims and tires and you will get MORE Comfortable Riding Experience.
  • Rust and corrosion resistance: Leveling kit is made of the same material as the aircraft, CNC machined out of billet aluminum, T6 treated and 12.9 Grade premium bolts, powdercoated black. It can cope with Harsh Environments.
  • NOTE: The ratio between lift height and kit thickness is not 1:1, because of suspension geometry. The thickness of front lift kits is less than 2.5", but the leveling kits will actually raise the truck by 2.5".
Supreme Suspensions - Front Leveling Kit for 2004-2020 Ford F150 2003-2017 Ford...
  • COMPATIBLE WITH 2004 - 2020 Ford F-150 (2WD 4WD), 2003 - 2017 Ford Expedition (2WD 4WD) and 2005 - 2008 Lincoln Mark LT (2WD 4WD). *Does NOT Fit F-150 FX-4 and 2004 Heritage Models. | *NOTE for Expedition owners: This kit does NOT fit Platinum trim or Models equipped with CCD independent or auto-ride suspension.
  • CONTENTS: (2x) T6 Aircraft Billet Aluminum Front Strut Spacers, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: 2.5 inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. An alignment is recommended after install.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.