Harness Kit for Radio 2009 Ford Escape

RED WOLF Aftermarket Stereo Install Wiring Harness Radio Speaker Power Plug...
  • Does NOT fit the radio with amplifier nor the subwoofer. Check your car model in our list before purchase!
  • Some vehicles factory deck doesn't have ACC wired to it, so you will need to run a separate switched power wire to your new deck .
  • Compatible with Compatible with Chrysler 300 2005-2007, Chrysler 300C 2005-2007, Chrysler Grand Voyager 2001-2007, Chrysler Neon 2000-2002, Chrysler PT Cruiser 2000-2005, Chrysler Voyager 2001-2005, Chrysler Concorde 2002-2004, Chrysler Sebring 2002-2006, Chrysler Town and Country 2002-2007.
  • Replacement For: 2002-2006 Dodge Ram 1500/2500/3500, Dodge Stratus 2003-2006 (Sdn),Dodge Van (full size) 2002-2003, Dodge Caravan 2002-2007, Dodge Stratus 2002-2002, Dodge Viper 2006-2010, Dodge Intrepid 2002-2004, Dodge Durango 2002-2003, Dodge Neon 2002-2005 , Dodge Dakota 2002-2007
  • Compatible with Jeep Cherokee 2001-2007 KJ, Jeep Commander 2006-2009 XK, Jeep Compass 2007-2008 MK, Jeep Patriot 2007-2008 , Jeep Wrangler 2003-2007 TJ.
Metra XSVI-5520-NAV Non-Amplified Non-OnStar Harness to Retain Accessory...
  • Provides accessory power (12 volt 10 Amp)
  • Retains R.A.Tpu (retained accessory power) if equipped
  • Provides navigation outputs (reverse/parking Brake/vehicle speed sense)
  • Used in non amplified systems or when removing the Sony/THX amplified system
  • Usb updatable and in new case
  • The XSVI Interface series provides a 12V accessory power output that uses data control signals instead of conventional power signals
  • 12 Volt Accessory Interface
GOOACC 5PCS Auto Trim Removal Tool Kit No-Scratch Pry Tool Kit for Car Door Clip...
  • SAVE TIME, FRUSTRATION AND MONEY -There are 5 pcs different kinds of trim tools, including 4 pcs car door panel removal tool and 1 fastener remover to facilitate your needs when repairing.
  • PREMIUM GRADE NYLON -This tool set made of impacted resistant nylon fiber material with high level craftsmanship, tougher than common nylon one, it’ s non-toxic and eco-friendly designed.
  • ERGONOMIC DESIGN - GOOACC trim removal tool kit is made in accordance with ergonomics design with super lightweight and easy handheld features which effectively effort saving for various interior and exterior car trimming.
  • MULTI-USE - Works great for car audio/radio system installing or removing, door panel, moldings, emblems, window trims or automotive interior repairing and furniture restoration
  • 100% SATISFACTION GUARANTEED: Please contact our customer service if there's any question
Nilight 10018W 14AWG DT Connector Wiring Harness Kit Bar 12V On Off Switch Power...
  • Universal fit this harness kit can be widely used in all automobiles, boats and devices that use a 12V power source
  • Simple connection equipped with DT connector no wiring between LED light bar and the harness kit simple and easy installation
  • Heavy duty harness with wire gauge of 14 AWG this heavy duty wiring harness can be used to connect a light bar within 300W
  • Circuit protection, power relays together with inline blade fuse to defense against overcurrent and short circuit ensuring safety
  • Package includes 1 x 12 foot wiring harness kit 1 x instructions
Nilight 50015R 200PCS Heat Shrink Butt Connectors – Waterproof Wire Connectors...
  • High quality polyamide cover outside and Red cooper tube inside allow the connectors to Bear high temperature and also has a good ability to conduct electricity
  • Waterproof nylon hot-melt adhesive with waterproof gel provides excellent waterproof performance, can be a good connectors used in marine and Automotive applications
  • Universal type three size options can be used to connected the wires range from 22awg-10awg, 90Pcs Red for 22awg-16awg wires, 90Pcs Blue for 16awg-14awg wires, 20Pcs yellow for 12awg-10awg wires;
  • Wire contact Red Copper barrel design increased current flow, and ensures voltage Drop, preventing wiring failures and reducing equipment quit working
  • Easy identification Color tube with wire gauge imprint makes it easy to identify the right size of the connector for every application
  • Fit Type: Universal Fit
Metra 40-CR10 Chrysler/Dodge/Jeep/Ford/GM 2002-Up Car Antenna Adapter
  • Antenna to Radio Adapter Cable
  • For 2002-up Chrysler, Dodge, Ford, and Jeep vehicles with snap-lock factory antenna
  • Adapter to aftermarket radio
Nilight - NI -WA 06 LED Light Bar Wiring Harness Kit - 2 Leads 12V On Off Switch...
  • Universal fit: Compatible with all automobiles, boats and devices equipped with a 12 volt power source
  • Circuit protection: Power relay-safety protection and conversion circuit. Blade fuse protects the circuit when overcurrent or short circuit occurs.
  • Illuminated switch: 3 pin on/off rocker switch with red indicator light when truing on, easy to turn on or off, has been passed test of 5,000 times pressing.
  • Two available leads: With 2 sets of light output connectors for dual lighting fixtures less than 180W, the connection is more stable.
  • Package include:1 x wiring harness kit, 1 x instructions.
iJDMTOY (1) 9005 9006 H10 Relay Harness Wire Kit with LED Light ON/OFF Switch...
  • Good for any system between 9V-16V with wattage not exceeding 130W
  • Comes with relay module box, wiring harness w/ adapters, safety fuse box, and LED indicator on/off switch
  • Good For Replacement fog lamps, Add-on fog lights, xenon LED lights, LED daytime running lights, Driving lights, LED work lights, Off-road lighting kit
Metra Axxess ASWC-1 Steering Wheel Control Interface
  • One interface does it all - No additional interface needed
  • Designed to be compatible with all major radio brands
  • Auto detects vehicle type, radio connection, and presets controls
  • Ability to dual assign steering wheel control buttons
  • Can be manually programmed for most vehicles. Provides Speed Dependent Volume Control on select CAN data vehicles
Nilight 2PCS 16 AWG 10 Feet Wiring Harness Extension Kit Wiring Harness...
  • 10ft Extension Wires: 16AWG wiring harness extension cable. It’s enough to extend your wiring harness where you want to install lighting location to help you mount LED work lights in truck or cabin easily.
  • High-quality: The Wiring Harness Extension Kit made of 16 Gauge flexible strand copper wire, rubber protected, High quality PVC insulation tube protect the whole harness from overheat.
  • Play and Plug design makes the extension wires installed easily
  • Wide Application: Suitable for almost all 12V battery vehicles, such as jeeps, ATVs, UTVs, cars, motorcycles, ships, yachts and trailers
  • Package Include: 2 x Wiring Harness Extension Kit
  • Fit type: Universal Fit