Leaf Spring Perches for Ford 8.8 Axle

Barnes 4WD - Anti-Wrap Leaf Spring Perch Pair compatible with, Dana 60, Ford 8.8...
  • Laser Cut from 1/4" US Steel
  • 7 3/4" length to prevent axle wrap
  • Multiple Leaf Srping Holes to adjust wheel base
  • Cut to Fit your axle
  • CNC Bent to ensure quality
Moroso 85090 3" Tube Spring Perch
  • Fit Type: Vehicle Specific
  • Package Dimensions: 11.684 H x 12.7 L x 11.176 W (centimetres)
  • Package Weight: 2.4 pounds
  • Country of Origin : United States
ELITEWILL 2PCS Steel Leaf Axle Spring Perch, Rear Seat Tube Mount Compatible...
  • 【Fitment】2.5" wide Axle Seats fit for 3" diameter axle tube.
  • 【Perfect Design】Rounded edges provide a perfect fit on most axle tubes.
  • 【Material】Made from high quality steel,strong and sturdy.
  • 【Easy to Install】Leaf spring axle seats are weld on replacements for original axle seats or for custom axle applications.
  • 【Package】2 x Axle Spring Perch.
LEAF SPRING PERCHES 3 1/4" TUBE, 2 1/2" SPRING, 6" LONG
  • These perches are a great upgrade over stock and will not deform under heavy loads.
  • Cut for a 3 1/4" axle tube diameter
  • 2 1/2" wide leaf spring. 5/8" center pin diameter
  • Cut from 1/4" steel 6" Long Adjust wheel base forward or back 1"
  • Sold in Pairs
NIXFACE 2Pcs Leaf Spring Axle Seat Perch Mount
  • Leaf Spring Axle Materials:Made from High Grade Steel.
  • Package Include:2pcs Axle Seats.
  • Vehicle Fitment:Compatible with 3" axle tube diameter.
  • Size/Dimensions: 2.5" wide Axle Seats.
  • Easy to Install:Leaf spring axle seats are weld on replacements for original axle seats or for custom axle applications.
Ford Racing M-1225-B 8.8" Axle Bearing and Seal Kit
  • Package Weight: 0.800 Lb.
  • Product Type: Auto Part
  • Package Quantity: 1
  • Package Dimensions: 5.588Cm (L) X 5.588Cm (W) X 6.604Cm (H)
Stainless Steel Pinion Yoke Wrench Tool - Extra Strength Puller for Loosening...
  • Extra Strength -- Instead of soft carbon steel that strips out easily, we crafted our flange wrench with Stainless Steel. Utilize this tool to handle the insane amount of torque needed to get the job done
  • Compatible With -- Our pinion yoke wrench is compatible with most Ford, AMC, Dana, and GM yokes. Fits almost all pinion and companion flanges. There are multiple slotted bolt patterns for 1/4", 5/16" and 3/8" fasteners. The center socket hole is 2"
  • Holds The Yoke In Place -- Use the pinion wrench while applying torque. It will help you loosen even the most stubborn pinion nuts. For leverage, grab a 1/2” breaker bar or 3/4” drive tool
  • Tighten Up -- Use the pinion flange tool with a torque wrench to tighten retaining bolts and nuts. Or for setting the bearing pre-load. It can also handle other high torque tasks, like crush sleeves
  • Additional 1/2" Square Socket -- Other yoke flange wrenches only have one and round out over time. The problem is, for tight spaces, you might need multiple. To address this, we added an extra 1/2" square socket. Plus, our stainless steel will prevent any rounding. You'll be able to utilize your pinion depth setting tool for years