Plug and Tow Harness for Ford Escape 2011

Tekonsha Tow Harness, 4-Way Flat, Compatible with Select Ford Escape : Mazda...
  • For 2008 - 2012 Ford Escape(Except Vehicles with Back Up Sensors), 2008 - 2011 Mazda Tribute, All Styles, 2008 - 2011 Mercury Mariner, All Styles
  • Upgrades vehicles from 4-Flat factory wiring to 6 or 7-Way connectors
  • Connects directly to standard factory connector
  • Stop/Turn circuit capacity of 7.5 Amps
  • Installs in seconds on vehicles not factory pre-wired
Nilight 50051R 4 Flat to 7-Way Round RV Blade Trailer Adapter Reverse Plug with...
  • This adapter converts 4 way flat vehicle end to 7 way blade trailer end, makes a tight connection between vehicle socket and trailer plug, no wiggle-room, no loose fittings. Transfers the power from the vehicle to trailer. Voltage ranges: 6-24 Volts
  • 4-pin flat socket designed to be converted to the 7-pin blade round type socket. Works on most vehicle wiring components like turn signals, brakes, reverse light and auxiliary power.
  • Heavy duty black plastic construction prevents rusting, enhances appearance. Well sealed spring loaded cover increases protection against dust, moisture and corrosion.
  • Wide Application: Suitable for most trailers, semitrailers, caravans, RV. Commonly used with T-connectors or tail lamp converters with 4-way flat car end connections
  • Package includes: 1x Trailer Adapter Plug, 1xMounting bracket 6 screws and 6 nuts.
Nilight - 10039W 4 Pin Flat Trailer Wiring Harness Kit 18AWG 25Feet Male 4Feet...
  • Wire Length: Comes with 18AWG 25ft male and 4ft female connector wire, both with full ground wire for your use. Designed to split at the trailer tongue and run down each side of the trailer to supply power for trailer lights.
  • Built To Last: Employ quality pure copper wire with tin plating for the best current conductivity and anti-oxidation ability, and premium PVC coating for the best anti-corrosion and anti-aging ability. Withstand sea water, no brittleness, no break, durable to last.
  • Standard 4 Way Flat Connector: Male plug with 5 wires, female plug with 4 wires. Plug and play, matches with any other standard 4 pin flat plugs.
  • Color Coded Wires: Wires are color coded and bonded, white for ground, brown for running and license light, yellow for left stop turn and green for right stop. Easily to route into your trailer's wiring system and connect with lights.
  • Universal Application: Work perfectly on trailers under and over 80” wide such as marine boat trailer, cargo utility trailer to install trailer lights.
Nilight Heavy Duty 7 Way Inline Trailer Plug with 7 Gang Junction Box - 8 Feet,...
  • Simply Your Wire Harness 7-way copper blade molded into a heavy duty plug provides a fast and simplified way for wires connection as well as keeping all your trailer wiring in order
  • Convenient Trailer Wiring Sturdy junction box with color marked 7-poles convenient for wiring left/right turn light brake signal lamp reverse light tail light etc Junction box is much easier than managing loose wires
  • Flexible Connection 8ft long cord with soft and durable PVC housing Flexible Connection The length prevents it from being strained during an emergency turn 7-Way Connects Brake Running Reverse Turn Signals and Auxiliary Power
  • Good Sealing Performance Four open and four close sealed rubber gaskets are provided to make the entire junction box waterproof dustproof and corrosion-proof
  • Package Included 1x 7-Way trailer plug with junction box 4 x open gaskets 4 x Close gaskets
  • Fit Type: Universal
CURT 56329 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Ford...
  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Ford Edge, Ford Escape, Ford Freestar, Lincoln MKX, Mazda Tribute and Mercury Mariner
  • RELIABLE POWER. This 4-way trailer wiring harness is built with surface mount technology. This type of circuitry generates less heat, optimal light intensity and durable performance
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements
Nilight 7-Way to 4-Way Flat Blade Trailer Adapter Waterproof Rugged Nylon...
  • Rugged Nylon Housing: Excellent water resistance, high temperature resistance, wear resistance and corrosion resistance, extend the life of the product
  • Strong Fixation: Standard plug internal design with strong fixing, 7-pin can hold the adapter in place, no need to worry about it will fall off
  • Practical Design: Easy to carry, small size, can be stored in a glove box or tool box, no need to take up extra space
  • Easy Installation and Disassembly: Simple plug-and-play, reasonable structural design in case that you can easy to install or removal our trailer adapter with no tools
  • Wide Adaptability: It can use for commercial vehicle / semi-trailer / trailer, no need for multi plugs to tow various vehicles, it is very practical for drivers
  • fit type: Universal
Nilight 10018W 14AWG DT Connector Wiring Harness Kit Bar 12V On Off Switch Power...
  • Universal fit this harness kit can be widely used in all automobiles, boats and devices that use a 12V power source
  • Simple connection equipped with DT connector no wiring between LED light bar and the harness kit simple and easy installation
  • Heavy duty harness with wire gauge of 14 AWG this heavy duty wiring harness can be used to connect a light bar within 300W
  • Circuit protection, power relays together with inline blade fuse to defense against overcurrent and short circuit ensuring safety
  • Package includes 1 x 12 foot wiring harness kit 1 x instructions
Nilight 50037R 12FT Cable DC Extension Cord 16AWG 2 Pin Wire Harness with...
  • Quality Wire: 12 Feet long copper wire, 16AWG, 2 Pin, with universal SAE connectors. Red wire is for positive and black wire for negative. The whole harness is heavy duty, super flexible and durable
  • Universal SAE Connectors: Standard terminals, quick connect/disconnect, compatible with most SAE port
  • Main Purpose: Designed to extend and maintain most battery chargers with SAE quick release connectors. Has a wide range application in the daily use of battery tenders, projects of motorcycles, trucks, solar panels, RVs and cars
  • High Protection: Each SAE connector comes with a dust cap to prevent it from raindrops and dust
  • Package Includes: 12FT 16AWG SAE extension cable, 2 Years
Nilight LED Light Bar Wiring Harness Kit 14AWG Heavy Duty 12V 5Pin Rocker Switch...
  • Premium quality: good electrical conductivity, outstanding bending performance, high temperature and melting resistant, longer lifespan
  • Efficient protection: power relay for safety protection and conversion circuit, blade fuse protect against overcurrent and short circuit
  • Durable switch: high quality 5 pin on-off rocker switch with laser-etched pattern, simple to install and convenient to use
  • Two leads Available: with 2 Sets of light output connectors for dual lighting fixtures less than 300W, the connection is more stable
  • Package include: 1 x wiring harness kit ,5-pin rocker switch, 1 x instructions
GOOACC 150 pcs Push-Type Bumper Fasteners Rivet Clips-2 Sizes Universal Auto...
  • IMPACT RESISTANT PUSH RIVETS - Well made of durable Nylon plastic, not easy to break or crack like other brands, it is super sturdy!
  • TOUGH FASTENER REMOVER- Durable Plastic and Metal material that has advantage of high abrasion resistance,allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them.
  • APPLICATION: Widely used for door trim, fender, bumper, radiator shield yoke, side skirt, grille, engine cover and splash shield retainers.Better than other clips
  • SIZES: One is measured Head Dia: 20mm; Stem Length: 22.8mm; Fits Into: 8mm hole. The other :Head Dia: 20mm; Stem length: 16 mm; fits: 10mm hole
  • PACKAGE INCLUDED: 100 pcs universal 8 MM push-type plastic clips,50 pcs 10mm Nylon Bumper Fender Flare Fastener,1 pcs 5-inch Fastener Remover.