GOOACC 425 Pcs Car Body Retainer Clips Set Tailgate Handle Rod Clip & Fastener...
- 【 WORKS FOR ALMOST ALL SITUATIONS】- The kit contains 19 types of most common sizes of fastener clips, cover 6mm to 10mm hole sizes replacement for Ford, GM, Chrysler, Toyota, Nissan, Mazda, Jeep, 2001 MR2 Spyder, 06 350z，1996 Ford F-250, motorcycles, Honda , Chevy Silverado. But NOT ONLY for these cars, if the sizes and shape meet your needs well, it's also a useful kit.
- 【 IMPACT RESISTANT PUSH RIVETS】 - Well made of durable Nylon plastic, not easy to break or crack like other brands, it is super sturdy!
- 【 PREFECT FOR WHAT YOU NEED 】- Up to 425 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted.
- 【 BONUS FASTENER REMOVER】 - Allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
- 【 WIDELY APPLICATION】- Theses push clips are widely used for trim panel clips, door trim clips, door panel clips, bumper clips, Fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
Eleven Guns 620 Pcs Car Retainer Clips, Plastic Fasteners Kit Fender Rivets Kits...
- [16 Sizes in One Box]: Eleven Guns fastener retainer clips include 16 most common sizes cover 5mm to 10mm hole sizes replacement for Ford, GM, Chrysler, Toyota, Honda and more. But not only for these cars, it's also a useful kit if the sizes and shape meet your needs well.
- [Durable]: Our push type retainers set made of High quality material with heavy-duty construction, would not break or crack easily during use.
- [Wide Application]: Plastic Fasteners Kit are widely used for door trim, radiator shield yoke, fender, bumper, side skirt, grille, engine cover and splash shield retainers replacement. These Auto Push Pins can also be used on cars, truck, motorcycles, buses, caravans, etc.
- [Accessories]: We provide 4 different size auto trim removal tools, 1 fastener remover and 5 Cable Ties to help you remove car door panel and upholstery clips quickly and easily without causing damage. Easy access into confined areas. All packed in a plastic container for easy organization and storage, also safe in your tool box or garage.
- [100% Satisfaction Guarantee]: We offers clear pictures for your reference, please check the size, type and shape to make sure the item is what you need. If you have any questions about our 620 Pcs Car Retainer Clips, please contact us directly. We promise that you will get friendly customer service.
Bully BBS-1103 Truck Black Powder Coated Side Step Set, 2 Pieces (1 Pair),...
- Supreme Support – Made from cast aluminum for superior strength with no welded seams and a 350 lb. weight limit to provide maximum strength
- Rugged Sophistication – Cast from one-piece of chrome plated aluminum, bully steps provide easy, safe access to your cab even in extreme conditions. The extra-deep step is rated to 350 pounds.
- Features our motac (motion activated illumination) powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced battery life
- Customizable – Lightweight aluminum is durable and paintable. 1 inch Stirrup side steps mount to trucks or SUVs
- Comes in Pairs – You will receive two pieces for your Trucks and SUVs. All Mounting Hardware and DIY Instruction Included
- Design with non-slip step pad, polished die-cast aluminum brackets
Maxpow 2 Pcs Gas Charged Hood Lift Support Struts Compatible with Ford F-250...
- Fitment: Gas Charged Hood Lift Support Struts Compatible With Ford F-250 Super Duty 1999 2000 2001 2002 2003 2004 2005 2006 2007
- Interchange Part Number: 4339, SG304029, 8194166, 013661, 2922MN, 2421VR, SG304061, F81Z16C826AA, F81Z16C826AD, F81Z16C827AA, F81Z16C826AB, 5C3416C827AA, F81Z1-6C826-AA, F81Z1-6C826-AD, F81Z1-6C827-AA, F81Z1-6C826-AB, 5C341-6C827-AA
- Specifications: Extended Length (inches) 17.32, Compressed Length (inches) 11.57
- Qty: 2pcs; Placement on Vehicle: Front Hood Gas Charged Lift Supports Struts Shocks Props Arm
- Attention: Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our lift supports.
2Pcs 22.28 Inch Rear Back liftgate tailgate Hatch trunk Struts Lift Supports...
- Pls check our production description to make sure our lift support fit your vehicle
- Replacement Lift Supports For:Trunk Caps, Camper,Marine,Toolbox & Universal Applications
- Extended Length:22.28[Inch] Travel Length:5.8[Inch] Pounds Of Force:225[LBS]
- NOTICE - We provide THREE YEAR WARRANTY for all our lift supports. Please contact us if you have any question.Designed For Original Equipment Fit And Performance,replaced with these in just a couple of minutes,your vehicle fully opens by itself like it used to do when new
- Gently reduces the opening and closing speed as the lift support reaches the end of the cycle, reducing wear on joints and hinges. Manufactured to automotive O.E. performance and quality specifications. Restores the original opening and closing speeds of your hood, hatch or trunk. No special tools required. Exact replacement, engineered for your application. Rust-resistant piston rod extends product life. Easy lifting, reduced closing effort. Consistent lifting force through 30,000 cycles.
MOCW Fit for 2003-2017 Ford Expedition, for Lincoln Navigator Rear Window Hinge...
- The Rear Window Hinge Replace OE # 7L1Z - 78420A68 - A, 7L1Z - 78420A69 -A.
- The Tailgate Rear Window Hinge Fit for all 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Ford Expedition & Lincoln Navigator Replacement, morde details please check description below.
- According to the original factory specifications, perfect match for the original car.
- Warm Note: Please check compatibility chart, part photos, OE part number and part description above carefully to make sure it is what you need.
- Package Included: 1 Pair (Right & Left) Rear Liftgate Glass Window Hinge （As shown in the figure). One full year of warranty, any questions, please feel free to contact us for a new replacement without worrying about any return fees.
iBrightstar Newest Extremely Bright Wedge T10 168 194 LED Bulbs for Car Interior...
- (Set of 10 Bulbs) 3SMD high brightness 3030 chips per bulb, Working Voltage: 9v-16v
- Fits: T10 147 152 158 159 161 168 175 184 192 193 194 2825 2827 W5W etc. Easy installation, plug and play.
- Application: License plate Lights, Side Door Courtesy Lights, Interior Map Lights, Vanity Mirror Lights, Dome Lights, Parking Lights, City Lights, Cargo Lights, Corner Lights, Trunk lights etc. This Bulb size can fit more than 1 position in your car.
- Advantage: Non-polarity design, 500% brighter than original halogen bulb, aircraft grade aluminum heat sink with Low temperature for Longer life span & Low Power Consumption(Up to 50,000 Hours Service Life).
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
Apexstone 80N/18lb Gas Strut,Gas Spring,Lid Support,Gas Shocks,Lift Support,Lid...
- Lids soft open gently,Ideal for supporting the lid to keep it open.NOT SOFT CLOSE!
- Force:18 Lbs(Per Strut),Length (Center-to-Center):7 inch(180 mm),Compressed Length (Center-to-Center):5.12 inch(130mm)
- Support opens lids to a maximum angle of 90 degrees.Available working temperature :-10℃~50℃/14℉-122℉
- Package included: 2 X 80N 7 Inch Gas Strut and 10 X Screws
- We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return
Bully TR-03WK Heavy Duty Cargo Tailgate Net for Full Size Pickup Truck Cab Truck...
- Heavy duty industrial reinforced fabric with extra wide nylon edging to prevent stretching and fraying
- Reduces air drag - Improves gas mileage
- Straps measure 10" long
- Simple to install
- Not Vehicle Specific. Universal Fit
Apexstone 200N/45LB 10 inch Gas Struts,Gas Springs,Gas Strut,Lift Support,Gas...
- Force:200N/45lb (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8",Set of Two in the Package.NOT SOFT CLOSE GAS STRUT!!!CONTACT US BEFORE PLACING ORDER
- 45 lb Gas Shocks Perfectly suitable for truck toolbox lid, RV door, cabinet lid, bed with storage,and other DIY projectsWidth).WORKING TEMPERATURE: -10 ℃ - 40 ℃/14℉-104℉mm).Bracket Holes' Size: 8 mm(diameter),8 mm(diameter),10 mm X 8 mm(Length X Width).WORKING TEMPERATURE: -10 ℃ - 40 ℃/14℉-104℉
- Lids soft open gently,Ideal for supporting the lid to keep it open,Support opens lids to a maximum angle of 90 degrees,it fit for the door/lid which the WIDTH is Less than 20 inch , the WEIGHT is between 45 and 90 lb,trailer,bed,RV under-bed storage, trap door etc.
- Package included: 2 X 200N Gas Strut and 10 X Screws
- We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately DOA or our 45 LBS GAS STRUT did not work well ,please kindly contact us for exchange, refund or return