Alla Lighting 3156 3157 Red LED Bulbs Super Bright 2835 39-SMD 12V Brake Stop...
- (Set of 2 W2.5x16q D.F. wedge base 3156/3157 red LED bulbs) LED Chips: 39 pieces high quality,high power with high performance led chips per 3156 3157 LED bulb ---360 degree full angle illumination with projector lens design
- Compatible with both standard and CK / SRCK type. Voltage: 12V - 14.8V, Built in stable current IC driver for longer lifespan. Color: Pure red.
- T25 base dual/single filament, Non-polarity. Cross reference number: 3156, 3056, 3047, 3047LL, 3047K, 3055, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 3057LL, 3155, 3155LL, 3157 ,3157K, 3157X, 3157LL, 3157ST, 3157KX, 3357, 3357LL, 3357K, 3457, 3457K, 4057, 4057LL, 4057K, 4114, 4114LL, 4114K, 4157, 4157LL, 4157K, 4157NA, p27/7w, 3157/40610, 3157/17172, 12450004, 78633, 17945, 3156/21863, 9442003, 78625, 17941, etc.
- Application: Used for upgrading automotive cars, trucks, motorcycles, SUVs, vans the stock incandescent dim rear turn signal blinker light, brake stop lights, tail lights, side marker light amp for much safer driving and luxury looking, load resistor maybe required to avoid the fast blinking issues.
- Warranty: fully ONE YEAR guaranteed for the manufacturer defect.please check the fitment note application before purchasing.
Partsam Red/White 12 LED Smoke Lens Chrome Housing Tail High Mount 3rd Third...
- Compatible With 1999-2016 Ford F-250/F-350/F-450/F-550 Super Duty 1993-2011 Ford Ranger
- Waterproof: This LED third brake light is IP67 waterproof, prevent from dust, mud, snow or heavy rain.
- Sturdy Lens:High Quality 3rd Brake lights made by OEM approved manufacturers with materials that meet strict OEM requirements
- Easy to Install:Black Wire (negative) + Red Wire (Positive), Red light works.Black Wire (negative) + White Wire (Positive), White light works.
- Pack Includes:1pc Chrome Housing Smoke Lens (6xRed+6xWhite) LED 3rd Third Brake Light
RUXIFEY LED License Plate Lights Tag Light Lamp Assembly Compatible with Ford...
- Compatible with 1999 to 2016 Ford F-Series Superduty F250 / F350 / F450 / F550, 1990 to 2014 Ford F150, 1990 to 1999 Ford F250, 1990 to 1997 Ford F350, 2004 Ford F150 Heritage, 1990 to 1996 Ford Bronco, 1984 to 1988 Ford Bronco II, 1983 to 2011 Ford Ranger, 1991 to 2004 Ford Explorer, 1991 to 2010 Ford Explorer Sport Trac, 2000to 2005 Ford Excursion, 1997 to 2002 Ford Expedition, 2006 to 2008 Lincoln Mark LT
- Brighter Than Stock Bulbs: Built-in high power 3 SMD LED chips, super bright 6000k white light output illuminates license effectively. With CANBUS control unit, no error code, a best replacement for OEM
- Fully sealed: Our license plate lights passed waterproof test, made of high quality material, no corrosion, anti-scratch, no faded with long-time exposure and can adapt to all kind of extreme weather, no water inside after a heavy rain or car wash anymore
- Easy Installation: Plug and play, exact fit and direct replacement, no modification or trimming needed, just take out your original bulbs and insert new plug into socket. Non-Polarity, no need to worry positive and negative connections
- Package Including: 2 x license plate lamps with instruction. 90 day manufacturer warranty since order purchase date, feel free to send email if there's any issue before or after purchase, your case will be taken seriously regardless of warranty period
VIPMOTOZ Red OLED Neon Tube Pure White LED License Plate Light Tag Lamp Assembly...
- [Exclusive Tribal Edition] - Still the BRIGHTEST Light Output in the Market. Yet with Red OLED Strips. Detail Matters.
- [Fully Plug & Play] - Simply Remove Original T10 Bulbs & Connect The Plug. Done.
- [Direct-Fit Replacement] - Identical to OEM Specification. No Modification or Trimming Needed.
- [SAE & DOT Approved] - 100% Street Legal. Meet All Regulations In USA & Canada.
- [Purchase with Confidence] - Limited Lifetime Warranty to Ensure 100% Satisfaction
AmeriLite for Ford F-Series F150 F250 F350 SuperDuty Clear Red Factory Style OE...
- Fits: 97-04 Ford F150 / 99-07 F250, 350, 450, 550 Super Duty F-Series (Only for Styleside Bed Model)
- Meets or Exceeds DOT & SAE Standards
- Direct OEM Replacement No Modification Needed
- New Aftermarket Part, Includes Both Driver & Passenger Side
- 30-Days Money Back Guarantee & 90 Days Limited Warranty
Nilight - TL-01 6" Oval Red LED Tail 2PCS w/Surface Mount Grommets Plugs IP65...
- Awesome Brightness: Each tail light has 10PCS high-quality SMD LEDs to output super bright red light, high brightness for Turn/Brake light, low brightness for Tail light, improving visibility and ensuring you a safer night.
- Easy Installation: The taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 6” x2. 5” x 1. 75”
- Upgraded Unique Design: Neligh's tail light has unique “ears” on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light. Shake proof, there will be no worries of loosing light or wires
- Ready For The Weather: Be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack
- Universal Application: Work on 12V DC system, function as turn/Brake light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just make sure the hole size before your purchase.
JDM ASTAR Extremely Bright PX Chipsets 3056 3156 3057 3157 LED Bulbs For Brake...
- Two bulbs per order.
- Color:Brilliant Red.Size: 2.60" long and 0.75" in diameter. 21-pieces high power PX chipsets per bulb. It is perfect for customers who are looking for a Extremely bright output
- Lighting Output：2520 raw lumens, 1260 lumens for each bulb.Fits: 3156 3056 3356 3456 4156 3157 3047 3057 3357 3457 3757 4057 4111 4157 etc.
- The difference between running/tail (stage 1) and brake/signal (stage 2) light is great(the high intensity is about triple birhgter than the low intensity)
- Used for turn signal lights,brake lights,tail lights,etc
For 97-03 Ford F150 F-150 Pickup Truck Styleside Model Red Clear LED Tail Lights...
- Fits 97-03 Ford F-150 Styleside Only 97-03 Ford F-250 Styleside Only 99-07 Ford F-250 Super Duty Styleside Only 99-07 Ford F-350 Super Duty Styleside Only 99-07 Ford F-450 Super Duty Styleside Only 99-07 Ford F-550 Super Duty Styleside Only
- Included Left Side (Driver Side) & Right Side (Passenger Side)
- Direct Bolt On Replacement For Your Original Parts, No Wiring or Any Other Modification Needed
- No Installation Guide or Instruction Included, Professional Installation is Highly Recommended
- If This Item Has Problem Due To Manufacturing Defects During Proper Intended Use, We Will Replace The Parts Only (Shipping Not Included). Bulbs not Included. If You Receive Lighting Product That Comes With Free bulbs, The Free Bulbs Are Not Covered Under Our Warranty. Our Warranty Applies Only To The Light Assembly.
iBrightstar Newest 9-30V Super Bright Low Power 3157 4157 3057 3156 LED Bulbs...
- (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high brightness chips per bulb, Working Voltage: 9v-30v (fit 12V, 24V vehicles).
- Fits: 3056, 3156NA, 3156K, 3156, 3156A, 3156AK, 3156NAK, 3047, 3047LL, 3047K, 3057A, 3057ALL, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 3057LL, 3155, 3155LL, 3157A, 3157AK, 3157 ,3157K, 3157X, 3157LL, 3157ST, 3157KX, 3157NA, 3157NALL, 3157NAK, 3357A, 3357ALL, 3356, 3357, 3357KNA, 3357LL, 3357K, 3454NA, 3457A, 3457ALL, 3457AK, 3457, 3457K, 3457NA, 3457NAK, 3757A, 3757AK, 3757ALL, 4057, 4057LL, 4057K, 4114, 4114LL, 4114K, 4157, 4157LL, 4157K, 4157NA, 4157NAK, 5702 ect.
- Application: Back Up Reverse Lights, Brake Lights, Tail Lights, Parking Lights, Side Marker Lights, Daytime Running Lights etc. You will need load resistor or flash relay to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage: Non-polarity design, Compatible for both CK/SRCK and Standard socket. More than 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution, built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
Nilight 10PCS 3.8 Inch 6 LED Red Side Marker Light Indicator Light Rear side...
- Excellent Brightness: Each light comes with 6PCS high intensity 2835 SMD LED, outputs excellent bright 120LM light for perfect marker light
- Awesome Seal: Decently sealed at both front lens and back wire lead. Compared with other brands, Our back wire lead is added proper glue to make it completely seal without affecting the surface mount
- 3 steps of light mounting: Mark and drill holes according to the foam tape base provided; Peel and stick the foam tape to the light; Run through the wire lead to the center hole and use bolts and nuts to fix 2 sides. Center hole might not be necessary if used some washer under the foam tape base when fixing the two sides
- Widely Used: Ideal for most 12V trailer, buses, trucks, trailers, lorries, RV, boat as LED marker light clearance light indicator Light
- Package Includes: 10 Pack of red side marker light, include a hardware pack and foam tape base
- Fit type: Universal Fit