Diode Dynamics Tail Light Sequencer compatible with Ford Mustang 2010-2021
- Adds sequential pattern to all tail light functions.
- Simple plug and play installation.
- Compatible with all years 2010+.
- Assembled in USA.
- 3-year limited replacement warranty
Raxiom Tail Light Sequencer; Plug-and-Play for Ford Mustang 2010-2020
- Upgrades Stock Factory Tail Lights
- Adds Sequentials To Hazard, Brake, And Lock/Unlock Modes
- Exceptional Electronics
- Easy Plug-N-Play Installation
- Fitted And Compatible With All 2010-2021 Mustangs With Us Spec Tail Lights
iJDMTOY (2) Universal 3-Step Sequential Dynamic Chase Flash Module Boxes...
- 2 pieces of 3-step sequential module boxes for both driver side and passenger side
- Three sequential outputs (each lasts about 0.28 seconds, with a complete rotation of 0.85 seconds for each turn signal blink)
- Some retrofit wiring action required; unless you are experienced, we highly recommend professional installation
Muzzys (SET OF TWO) Wire Harness Pigtail Light Socket Repair Kit, Replaces GM...
- Made by Muzzys and uses the same Delphi/Packard connectors, terminals, and seals as the factory wiring harness using the factory correct cross linked polyethelene high temperature TXL wire in the proper gauge.
- Includes TWO Sockets and FOUR High Quality Nylon Splices
- Heavy duty, High efficiency, Heat resistant, Will never melt
- Pre-Wired Socket For Easy Plug-N-Play Installation
- Please double check the pictures to make sure the adapter is the same as your stock adapter to ensure proper fit
Nilight - TL-18 2PCS 4" Round Red LED Trailer Tail Lights w/Surface Mount...
- Top LED: Each light has 12PCS upgrade Piranha LEDs, feature better heat dissipation, wider lighting angle, higher intensity light and extend a longer lifetime, features excellent bright light and extend a longer lifetime
- Stand Out Brightness: Output 3 time brighter light than others. High brightness of Turn/Brake light, low brightness of Tail light. Improve visibility and ensure you a safer night
- Easy Installation: Just surface mount the grommets & light setup, attach the 3-prong plug to light, and then connect the 3 wire lead. Hole size for surface mount is: 4. 3” diameter hole, 2” depth
- Ready For The Weather: Be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack
- Universal Application: Work on 12V DC system, function as turn/Brake light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just make sure the hole size before you purchase
DITRIO 12pcs Underglow RGB LED Strip Light Kit DC 12V with 2 Red Blinking Brake...
- ➤Quality & Reliability as Priorities: LED strip kits for motorcycles have difficult working conditions – fluctuating voltages, instantaneous higher currents etc., this LED strip kit focuses on how to make it work and last.
- ➤Maximum Brightness: LEDs with gold bonding wires – 30% higher electrical conductivity, 3.55% more light than the cost-effective material copper; 60 LEDs per meter, up to 1,000 Lumens per meter.
- ➤Bigger Capacities for Brighter Bikes: 3 x 3A big MOSFETs, wires of AWG 22 & 24, ensuring strips more than enough power supply even you double the strips for a bright “Christmas tree”.
- ➤2 Additional Blinking Brake Lighting Styles: Besides the default solid red light as an additional brake signal, M12r now comes with 2 blinking styles, available via the 24-key remote.
- ➤Music Mode: An independent microphone in the control box, gold-plated pins, a 60X sensitivity, beautifully follows the rhythms of your music.
iBrightstar 50W 6ohm Load Resistors for Fix LED Bulb Fast Hyper Flash Turn...
- 2PCS 50W 6ohm Load Resistors + 4PCS Quick wire Clip.
- Prevent LED Turn Signal Lights or License Plate Brake Lights from hyper flashing, malfunction or trigger warning message on dashboard.
- NOTICE! Load Resistors heat up like light bulbs and get super HOT when working. Make sure you mount them away from any wires or plastic.
- One resistor is required for each turn signal bulb or each license plate light bulb.
- Easy installation. Just connect the wires with the splice taps provided and no wire cutting is necessary.
Alla Lighting 3156 3157 Red LED Bulbs Super Bright 2835 39-SMD 12V Brake Stop...
- (Set of 2 W2.5x16q D.F. wedge base 3156/3157 red LED bulbs) LED Chips: 39 pieces high quality,high power with high performance led chips per 3156 3157 LED bulb ---360 degree full angle illumination with projector lens design
- Compatible with both standard and CK / SRCK type. Voltage: 12V - 14.8V, Built in stable current IC driver for longer lifespan. Color: Pure red.
- T25 base dual/single filament, Non-polarity. Cross reference number: 3156, 3056, 3047, 3047LL, 3047K, 3055, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 3057LL, 3155, 3155LL, 3157 ,3157K, 3157X, 3157LL, 3157ST, 3157KX, 3357, 3357LL, 3357K, 3457, 3457K, 4057, 4057LL, 4057K, 4114, 4114LL, 4114K, 4157, 4157LL, 4157K, 4157NA, p27/7w, 3157/40610, 3157/17172, 12450004, 78633, 17945, 3156/21863, 9442003, 78625, 17941, etc.
- Application: Used for upgrading automotive cars, trucks, motorcycles, SUVs, vans the stock incandescent dim rear turn signal blinker light, brake stop lights, tail lights, side marker light amp for much safer driving and luxury looking, load resistor maybe required to avoid the fast blinking issues.
- Warranty: fully ONE YEAR guaranteed for the manufacturer defect.please check the fitment note application before purchasing.
APDTY 756112 Turn/Parking Light socket Replaces 2U5Z-13411SA, 2U5Z13411SA
- Brand New Turn Signal, Parking Light, or License Plate Lamp Bulb Socket
- Fits Rear Left or Rear Right
- Compare your exisitng socket to the image to verify match. Plastic bulb housing may be brown or pink in color.
- Replaces 2U5Z-13411SA, 2U5Z13411SA
RT-TCZ Tail Light Lamp Cover Guard Trim Frame Bezels Decoration Accessories for...
- 【PERFECT FITMENT】Original tail light molding and radian design. Perfect fit for all model Ford Mustang 2018, 2019, 2020 2021.
- 【HIGH QUALITY】Top notch acrylic material, great visibility, does not affect the use of light and not fade and crack in using.
- 【SPORTY DESIGN】Fashion smoked black taillights shell, enhance the sports style of the sports car, upgrade the uniqueness and aggressiveness of your Mustang.
- 【EASY INSTALLATION】Simpe and quick installation, sticking with double side adhesive tape at back side, does not damage the original vehicle lamp.
- 【WARRANTY】Admission to 30 days free of charge returned & 365 days replacement.