Timing Tool for Ford 3.5L & 3.7L 37100

Camshaft Holding Tool Timing Alignment Holder Tool Set Kit for Ford Lincoln...
  • Fitment Vehicle: Fit Ford V6 3.5L & 3.7L Cyclone Engines, for Ford Edge, Explorer, F150, Flex, Fusion, Fusion Hybrid, Mustang, Taurus, Police Interceptor; for Lincoln MKS, MKT, MKX, MKZ, Navigator; for Mercury Milan, Sable, Replace 303-1248 303-1530 OTC 6682
  • Exact Match: This camshaft holding tool timing tool set designed specifically for Ford V6 3.5L & 3.7L Cyclone Engines, high precision and great compatibility , and through rigorous engine testing, While is not a genuine original, it is a direct replacement and completely fit, better than spending $300 for a car factory brand tool
  • Material: Made of high standard structural steel and coated with black oxide finish, it is excellent solid with great durability. Plus, it has good performance on rust and crack resistance to long-lasting service your engine
  • Professional Timing Tool: This camshaft timing alignment holder tool work great holding the cams to do a water pump. easy to used and holds great.Use this tool to accurately position and align hold your 3.5L & 3.7L camshaft at TDC to perform service
  • Lifetime Warranty: We offer lifetime warranty, we will refund or replace, if the product have any quality problem
kipa Timing Tool Camshaft Holder Tool kit Camshaft Holding Tool for Ford 3.5L...
  • Perfect New Design KIPA Timing Tool Camshaft holder Tool kit Camshaft Holding Tool For Many Ford 3.5L 3.7L Engines
  • Easy to hold, There is blank square space for handle to hold and install, You don't have to use your fingures for timing or Take it out difficultly after using.
  • Fitment: They could use for 2007 – 2014 3.5L Edge; 2011 – 2014 4.0L Edge; 2011 – 2014 3.5L Explorer, F-150; 2011 – 2014 3.7L F-150, MKX; 2011 – 2012 4.0L F-150, MKX, Mustang; 2012 – 2014 3.5L Flex; 2010 – 2012 3.5L Fusion Hybrid; 2007 – 2011 3.5L Milan; 2010 – 2014 3.5L MKS, MKT;
  • Fitment:They could also use for 2009 – 2014 3.7L MKS; 2010 – 2014 3.7L MKT; 2007 – 2012 3.5L MKX, MKZ; 2013 – 2014 3.7L MKZ; 2011 – 2014 3.7L Mustang; 2008 – 2012 3.5L Sable; 2008 – 2014 3.5L Taurus, Taurus X;
  • The Tool is made of Top quality 4140 Steel. Very Easy to Hold and fit tight, and hold the cams in place as designed.
Yeeoy Camshaft Holding Tool Engine Timing Alignment Holder Kit Replacement for...
  • Camshaft Holding Tool Kit with Tension Tool.
  • Helps ensure Camshaft alignment during removal and installation of the timing chain.
  • Camshaft Holding Tool is made of iron,very hard and very durable.
  • Helps ensure vehicle maintenance accuracy and protection.
  • Fitment:2007 – 2014 3.5L Edge 2011 – 2014 4.0L Edge 2011 – 2014 3.5L Explorer, F-150 2011 – 2014 3.7L F-150, MKX 2011 – 2012 4.0L F-150, MKX, Mustang 2012 – 2014 3.5L Flex 2010 – 2012 3.5L Fusion Hybrid 2007 – 2011 3.5L Milan 2010 – 2014 3.5L MKS, MKT 2009 – 2014 3.7L MKS 2010 – 2014 3.7L MKT 2007 – 2012 3.5L MKX, MKZ 2013 – 2014 3.7L MKZ 2011 – 2014 3.7L Mustang 2008 – 2012 3.5L Sable 2008 – 2014 3.5L Taurus, Taurus X
Fit for 303-1248 303-1530 OTC 6682 Camshaft Holding Tool and Chain Tensioner Set...
  • Vehicle Fitment: Fit for 2007 – 2014 3.5L Edge 2011 – 2014 4.0L Edge 2011 – 2014 3.5L Explorer, F-150 2011 – 2014 3.7L F-150, MKX 2011 – 2012 4.0L F-150, MKX, Mustang 2012 – 2014 3.5L Flex 2010 – 2012 3.5L Fusion Hybrid 2007 – 2011,3.5L Milan 2010 – 2014 3.5L MKS, MKT 2009 – 2014 3.7L MKS 2010 – 2014 3.7L MKT 2007 – 2012 3.5L MKX, MKZ
  • 2013 – 2014 3.7L MKZ 2011 – 2014 3.7L Mustang 2008 – 2012 3.5L Sable 2008 – 2014 3.5L Taurus, Taurus X, Use this tool to accurately position and align hold your 3.5L & 3.7L camshaft at TDC to perform service
  • Helps ensure Camshaft alignment during removal and installation of the timing chain
  • PACKAGE INCLUDED: 2 X Camshaft Holding Tools, 1 X Tension Tool
  • GUARANTEE - If you're not 100% satisfied with our products, simply return it for a full refund in 30 days, no questions asked money back guarantee. Premium Support & 1 Year Warranty
Camshaft Holding Tool Kit with Chain Tensioner 303-1248( Lincoln Mercury 3.5L...
  • Designed specifically for Ford V6 3.5L & 3.7L Cyclone Engines, for Ford Edge, Explorer, F150, Flex, Fusion, Fusion Hybrid, Mustang, Taurus, Police Interceptor; for Lincoln MKS, MKT, MKX, MKZ, Navigator; for Mercury Milan, Sable. Replace 303-1248 303-1530.
  • Made of high standard structural steel with excellent solid, high precision and great compatibility. Coated with black oxide finish for resisting rust and crack.
  • Use the camshaft holding tool to hold the camshafts in the Top Dead Center (TDC) position, Insert the chain tensioner hold down tool through the hole in the top of the mega gap and position it against the mega gap to retain the tensioner in the compressed position.
  • Package incluede: 2 X Camshaft Holding Tools, 1 X Tension Tool.
  • Fitment:2007 – 2014 3.5L Edge 2011 – 2014 4.0L Edge 2011 – 2014 3.5L Explorer, F-150 2011 – 2014 3.7L F-150, MKX 2011 – 2012 4.0L F-150, MKX, Mustang 2012 – 2014 3.5L Flex 2010 – 2012 3.5L Fusion Hybrid 2007 – 2011 3.5L Milan 2010 – 2014 3.5L MKS, MKT 2009 – 2014 3.7L MKS 2010 – 2014 3.7L MKT 2007 – 2012 3.5L MKX, MKZ 2013 – 2014 3.7L MKZ 2011 – 2014 3.7L Mustang 2008 – 2012 3.5L Sable 2008 – 2014 3.5L Taurus, Taurus X
OTC 6682 Ford 3.5L & 3.7L 4V Cam Tool Set
  • OTC's Ford 3.5L, 3.7L, and 4.0L 4V Cam Tool Set is the ideal solution for engine service procedures involving camshafts or other timing components that require camshafts be held stationary
  • Set contains a pair of Cam Locks to hold all four camshafts at TDC along with a Timing Chain Tensioner Hold Down Tool that releases the tensioner for timing chain removal
  • For use on: 07-14 3.5L Edge; 11-14 4.0L Edge; 11-14 3.5L Explorer, F-150, 11-14 3.7L F-150, MKX; 11-12 4.0L F-150, MKX, Mustang, 12-14 3.5L Flex, 10-12 3.5L Fusion Hybrid
  • 07-11 3.5L Milan; 10-14 3.5L MKS, MKT, 09-14 3.7L MKS, 10-14 3.7L MKT, 07-12 3.5L MKX, MKZ; 13-14 3.7L MKZ; 11-14 3.7L Mustang; 08-12 3.5L Sable; 08-14 3.5L Taurus, Taurus X
  • Includes detailed instructions with drawings for both the cam and timing tensioner tools; rugged blow molded plastic storage case keeps tools protected and contained when not in use
BETOOLL HW9204 303-1248 303-1530 Ford 3.5L & 3.7L 4V Cam Tool Holding Set
  • Use this tool to accurately position and align hold your Ford 3.5L & 3.7L camshaft at TDC to perform service.
  • Helps ensure Camshaft alignment during removal and installation of the timing chain.
  • Vehicle Fitment:2007 – 2014 3.5L Edge 2011 – 2014 4.0L Edge 2011 – 2014 3.5L Explorer, F-150 2011 – 2014 3.7L F-150, MKX 2011 – 2012 4.0L F-150, MKX, Mustang 2012 – 2014 3.5L Flex 2010 – 2012 3.5L Fusion Hybrid 2007 – 2011 3.5L Milan 2010 – 2014 3.5L MKS, MKT 2009 – 2014 3.7L MKS 2010 – 2014 3.7L MKT 2007 – 2012 3.5L MKX, MKZ 2013 – 2014 3.7L MKZ 2011 – 2014 3.7L Mustang 2008 – 2012 3.5L Sable 2008 – 2014 3.5L Taurus, Taurus X
YSTOOL Camshaft Holding Tool Set Engine Cam Shaft Timing Alignment Holder Tool...
  • Timing chain synchronizes the rotation of the crankshaft and camshaft and allows the engine valves to open and close during each cylinder's ignition. If the timing system fails, your engine may rattle and misfire. YSTOOL engine camshaft alignment timing tools help to keep the camshaft alignment, convenient for you to replace your worn or elongated belts / chains or do follow-up timing system repair and maintenance work, to ensure appropriate timing and keep your engine in a ideal state
  • Camshaft timing alignment holding tool applies to a wide range of vehicles with 3.5L 3.7L 4V engines, compatible with such as Ford, Edge, Mustang, Explorer, MKX, MKT, MKZ, Flex, Fusion Hybrid, Milan, Sable, Taurus,Taurus X and fits F-150. Please refer to the description for the specific adaptation. It comes with two 303-1248 cam shaft holding tools and a 303-1530 chain tension tool. With specific tools to help the timing system repair work, camshafts can be held from moving during service
  • When maintaining the timing system, gently slide the engine camshaft holder tool into place to hold the camshaft in the TDC position, keep the camshaft aligned. Some extra tools may need according to the specific situation to support the camshaft, for example remove and install the cam bolts. Insert the chain tension tool through the hole from the top of the mega gap and use it to keep the tensioner in the compression position. Actual operation depends on the car manual and vehicle condition
  • Heavy duty cam holding tool and tensioner hold down tool, made of premium structural steel with integral forging technology and coated with black oxide finish, good crack resistance and antirust performance. Healthier and safer. Tool capability and quality has been proven by a great deal of rigorous engine tests, please rest assured to choose. Please note, timing system maintenance should be operated by professionals
  • Your satisfaction and recognition are always what we pursue. Within one month from the date of purchase, the product can be returned unconditionally if it is complete and without any damage. Within one year warranty period, any quality issue with the product, you are promised to exchange or refund the problematic parts for free. Please contact us to resolve any issues during your use before leaving any feedback.
8MILELAKE Camshaft Holding Timing Alignment Holder Tool Compatible For Ford...
  • USAGE: This camshaft holding tool is specially designed for camshaft holding in the TDC position and hold down chain tensioner in the compresssed position. ensure camshaft alignment during removal and installation of the timing chain.
  • WILD APPLICATION: This timing alignment holder tool fit for Ford V6 3.5L & 3.7L Cyclone Engines, fit Ford Edge, fit Explorer, F150, fit Flex, fit Fusion, fit Fusion Hybrid, fit Mustang, fit Taurus, fit Police Interceptor; Fit for Lincoln MKS, MKT, MKX, MKZ, fit Navigator; fit Mercury Milan, fit Sable, Replace 303-1248 303-1530 OTC 6682
  • DURABLE MATERIAL: The camshaft holding tool is made of high standard structural steel with excellent solid, high precision and great compatibility. Coated with black oxide finish for resisting rust and crack.
  • EASY TO USE: Use the camshaft holding tool to hold the camshafts in the TDC position, Insert the chain tensioner hold down tool through the hole in the top of the mega gap and position it against the mega gap to retain the tensioner in the compressed position.
  • CONVENIENT CARRY CASE: camshaft timing alignment holder tool comes with a plastic carry case, very easy to organize and carry out
303-1248 303-1530 Camshaft Holding Tool and Chain Tensioner Set Compatible with...
  • VEHICLE FITMENT: Fit for Ford V6 3.5L & 3.7L Cyclone Engines, for Ford Edge, Explorer, F150, Flex, Fusion, Fusion Hybrid, Mustang, Taurus, Police Interceptor; for Lincoln MKS, MKT, MKX, MKZ, Navigator; for Mercury Milan, Sable, Please kindly confirm more compatibility details on the below product descriptions before purchase.
  • INTENDED USE: Use this tool to accurately position and align hold your compatible with Ford 3.5L & 3.7L camshaft at TDC to perform service, simplifying your timing chain work. Insert the chain tensioner hold down tool through the hole in the top of the mega gap. Position it against the mega gap to retain the tensioner in the compressed position.
  • PROFESSIONAL TIMING TOOL: Designed specifically for Ford V6 3.5L & 3.7L Cyclone Engines, high precision and great compatibility. Replace 303-1248 303-1530. The camshaft timing alignment holder tool work great holding the cams to do a water pump, easy to used and holds well.
  • SUPERIOR QUALITY: Made of high standard structural steel with excellent solid and great durability. coated with black oxide finish for resisting rust and crack to long-lasting service your engine. Package include 2 X Camshaft Holding Tools, 1 X Tension Tool.
  • 100% SATISFACTION GUARANTEE: Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Camshaft Holding Tool Set, simply return it for a full refund in 30 days.